Tag Archives: machine distillation

China OEM Latest Technology Waste Car Motor Oil Refinery Machine Get Base Oil Distillation with Good quality

Product Description

Product Description

Application
JZC waste oil distillation machine heat the waste oil to (from 110ºC to 350ºC) different temperature under high vacuum condition, making Hydrocarbon molecules break out, and re-order combination, forming diesel oil, lubricating base oil etc. JZC machine is very suitable for the small oil refinery company, also for the small oil company who want to make the oil by self.
Features and Advantages 
I.The vacuum system uses the roots pump as the main pump and the rotary vane vacuum pump as the primary pump. Fast start-up, large
pumping speed, stable performance, and high ultimate vacuum of less than 5Pa.
II.Double horizontal vacuum separators, combined with Duplex-Stereo film evaporation technology 
III.Strong ability to remove impurities: ultra-large area cylindrical precision filter element, with high filtration accuracy, easy installation and replacement.
IV.Low-load heating: Adopt advanced internal and external double-tube heat radiation indirect heating technology.
V.Automatic control to realize unattended, safe and stable working. 
VI.Safety interlock protection for oil pump, vacuum pump, heater,keep safely working 
VII.Low noise, easy operation, long maintenance interval, low energy consumption, low operating cost 
VIII.It can be used together with the insulation oil regeneration device, which has the effect of decoloring, deacidification, deoxidation and removing
free carbon and other harmful substances from the oil.

Most 3 obvious advantages of our JZC equipment compared with competitors

1. The warranty period of our equipment is 2 years, and other companies usually only have 1 year.

2.Distillation tank has insulation layer, which has energy-saving effect    3.The cooler is made of stainless steel, which has a longer life. 

JZC machine workflow

 

This is a simple flow chart of JZC. If you want a more detailed flow chart, please contact Sales Manager AmyQian

  Working Steps Of The Machine( Omitted version  )
There are 5 steps from waste oil to base oil.
1.Use press paper filter device filter impurities in waste oil
2.The waste oil leads to the waste oil mixing tank, heat the waste oil to 60-80 ºC and then mix it with sodium hydroxide. When sodium hydroxide is mixed with waste oil, a chemical reaction will occur, flocculation and precipitation.
3.Use press paper filter device filter waste oil again, the waste oil then flows to the distillation tank.
4. Set the temperature, let the distillation tank heat to the set temperature, and distill out water vapor and oil vapor. The distillation temperature reaches 80-110ºC, and water is distilled.The distillation temperature reaches 120-210ºC, and Gasoline and diesel is distilled. The distillation temperature reaches 220-290ºC, and light base oil is distilled. The distillation temperature reaches 300-350ºC, and heavy base oil (Viscosity≥SN150 ) is distilled.
5. The oil is then condensed through a cooler condenser,condensation from vapor state to liquid state. This step is actually the operation of employees opening different valves and pumps. There is no difficulty in operation. Emphasize that the machine comes with a collection tank that can separate different types of oil.

Oil Parameters After Treatment

 

 

Final Product Ratio Percentages Distillation Temperature Vacuum Value
Water 2% 80ºC-110ºC -0.098
Gasoline and diesel  8% 120ºC-210ºC 500Pa
Light base oil  40% 220ºC-290ºC 50-500 Pa
Heavy base oil 45% 300ºC-350ºC 50-500 Pa
Oil Resicudal 5%    
Total 100%    

Detailed Photos

 

 

 

 

 

Project Show

 

Representative of key projects
Panamanian customers personally visited our customer’s factory and obtained oil samples. After returning to Panama, he took the oil sample to the laboratory for testing and placed an order for our JZC equipment. He bought 3 sets JZC in total, and now he has become our agent in South Africa .

 

Customer Visit Our Company

 

 

 

Certifications

 

Company Prrofile :
ZheJiang CHINAMFG ELECTROMECHANICAL CO.LTD.is a professional mechanism manufacturer (oil purifier) from ZheJiang China.The company has a 3000 square meter production workshop with more than 40 staffs and engineers. The company is joint-stock high-tech enterprise, after 10 years of development, company has grown into a comprehensive enterprise, engaging in vacuum oil purifier producing, filter element producing, and Imp&Exp trading. CHINAMFG oil purifier and filter are widely applied in projects of transformer substation, electric department, steel structure, bridge, auto, railway, aviation, chemicals, petroleum etc. The products are exported to more than 30 countries and areas, such as Europe, America, Middle East, Southeast Asia and so on. The product gets the good reputation from the dealer and end user.

FAQ

Q1. What are the heating methods of the machine?
A: The conventional heating method of JZC is electric heating. If you need to customize the burner heating mode, we can also customize it for you.

 

Q2. How about the Installation of the machine?
A: About installation, the installation of the machine is modular and sample.If we send engineer , buyer need to be responsible for engineer’s round-trip airfare, visa, accommodation and his salary 100 dollars /day. With the installation instructions,buyer can also install by themselves. Our Engineers can talk with customers in English video to teach how to install and use the machine.Whether engineers are needed or not depends on the customers themselves.

Q3. What is your terms of payment?
A: Generally, we use T/T, 30% in advance, balance pay after the machine finish.

Q4. How about your delivery time?
A: Generally, JZC-1 (1 ton/day) need 35 workings days to finish. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you customized goods for us?
A: Yes, we can customized according to your flow requirements, the brand requirements of parts used in the machine……..

Q6. If you have any inspection or test for your goods before delivery?
A: Yes, we do the inspection and test before finished goods.

Q7. Can we visit your factory?
A: Yes, we warmly welcome your visiting, and can pick up you at airport or train station.

 

 

 

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: ISO9001, CE
Application: Turbine Oil, Lubricant Oil, Engine Oil, Waste Oil
Voltage: 380V
Folw Rate: 1-100 Tons/Day
Color: White, Blue, Gray, Yellow
Warranty: 2 Years
Customization:
Available

|

motor base

How do motor bases contribute to ease of maintenance for electric motors?

Motor bases play a significant role in facilitating ease of maintenance for electric motors. Here’s a detailed explanation:

1. Accessibility: Motor bases provide easy access to the motor for maintenance purposes. They offer a stable and secure platform that allows technicians to reach the motor quickly and perform routine tasks such as inspection, cleaning, lubrication, and belt adjustments. Motor bases with open designs or removable covers further enhance accessibility by providing unobstructed access to critical motor components.

2. Adjustability: Many motor bases are adjustable, allowing for precise positioning and alignment of the motor. This adjustability simplifies maintenance procedures as it enables technicians to align the motor shaft with the driven equipment accurately. Proper alignment helps reduce wear, vibration, and energy loss, ultimately improving the motor’s performance and extending its lifespan.

3. Vibration Reduction: Motor bases often incorporate features that help dampen vibrations generated by the motor. Excessive vibrations can lead to premature wear and damage to both the motor and surrounding equipment. Motor bases equipped with vibration isolation pads or mounts absorb and dissipate vibrations, reducing stress on the motor and minimizing the need for frequent maintenance or repairs.

4. Easy Removal and Replacement: In some situations, it may be necessary to remove the motor from its base for more extensive maintenance or repairs. Motor bases are designed to facilitate the removal and replacement of motors as needed. They typically provide mounting features that allow for straightforward disconnection and reconnection of the motor, saving time and effort during maintenance activities.

5. Documentation and Labeling: Motor bases often include labeling or documentation areas where relevant information can be recorded. This documentation can include motor identification details, installation dates, maintenance schedules, and torque specifications. Having this information readily available on the motor base simplifies maintenance planning, tracking, and troubleshooting.

6. Compatibility with Accessories: Motor bases are often designed to be compatible with various accessories that aid in maintenance. These accessories may include cable management systems, drip pans for fluid containment, or mounting brackets for additional components. The compatibility of the motor base with such accessories enhances ease of maintenance by providing integrated solutions that support efficient and organized maintenance practices.

By incorporating these features and considerations, motor bases contribute to the ease of maintenance for electric motors. They provide accessibility, adjustability, vibration reduction, and easy removal options, simplifying routine maintenance tasks and ensuring the smooth operation and longevity of electric motors.

motor base

What role does corrosion resistance play in the selection of motor bases?

Corrosion resistance plays a crucial role in the selection of motor bases. Here’s a detailed explanation:

1. Protection of Motor Base: Motor bases are often exposed to various corrosive agents such as moisture, chemicals, saltwater, or industrial gases. Corrosion-resistant motor bases are designed to withstand these corrosive environments and prevent the deterioration of the base material. By selecting a corrosion-resistant motor base, you can ensure its durability and longevity, reducing the risk of premature failure or structural damage.

2. Preservation of Aesthetic and Functional Appearance: Corrosion can impact the aesthetic appearance of the motor base, causing discoloration, rust, or pitting. However, corrosion resistance helps maintain the visual appeal of the motor base over time. Additionally, corrosion can compromise the functionality of the motor base by weakening its structural integrity or hindering its adjustability features. By choosing a corrosion-resistant motor base, you can preserve both the aesthetic and functional aspects of the base.

3. Protection of Surrounding Equipment: Corrosion can extend beyond the motor base itself and affect other components or equipment in the vicinity. For example, if a corroded motor base transfers rust or contaminants to connected equipment, it can lead to operational issues or premature failure of those components. Opting for a corrosion-resistant motor base helps protect the surrounding equipment and ensures the smooth operation and reliability of the entire system.

4. Improved Maintenance Efficiency: Corrosion-resistant motor bases require less frequent maintenance and repair. They are less prone to degradation, which reduces the need for regular inspections, cleaning, and surface treatments. This not only saves time and effort but also minimizes maintenance costs associated with corrosion-related issues.

5. Environmental Compatibility: Industries or applications that involve exposure to corrosive environments, such as coastal areas, chemical plants, or wastewater treatment facilities, require motor bases that can withstand these conditions. Corrosion-resistant motor bases are designed to meet the specific environmental challenges and provide reliable performance in such demanding settings.

6. Long-Term Cost Savings: Although corrosion-resistant motor bases may have a higher initial cost compared to standard bases, they offer long-term cost savings. By investing in a high-quality corrosion-resistant motor base, you can mitigate the expenses associated with premature replacement, repairs, and downtime caused by corrosion-related issues.

When selecting a motor base, consider the environmental conditions, exposure to corrosive agents, and the expected service life of the motor base. Consult with manufacturers or suppliers to identify corrosion-resistant options that are compatible with the specific application requirements. They can provide guidance on suitable materials, coatings, or finishes that offer optimal corrosion resistance for your motor base.

motor base

What role does a motor base play in reducing vibration and noise from motors?

A motor base plays a crucial role in reducing vibration and noise generated by motors. Here’s a detailed explanation:

Electric motors can produce significant vibrations and noise during operation, which can have negative effects on equipment, structures, and human comfort. Motor bases are designed to minimize these vibrations and noise by performing the following roles:

1. Vibration Dampening: Motor bases are constructed using materials and designs that help dampen the vibrations produced by motors. Materials with good vibration-dampening properties, such as steel or cast iron, are commonly used in motor bases. These materials absorb and dissipate vibrations, preventing them from propagating to the supporting structure. By reducing vibrations, motor bases help minimize the transmission of vibrations to surrounding equipment, which can prevent damage, improve performance, and extend the lifespan of connected machinery.

2. Isolation: Some motor bases incorporate isolation features to further reduce vibration transmission. These bases may include elastomeric mounts, springs, or other damping elements that isolate the motor from the mounting surface. These isolating elements absorb and dissipate vibrations, providing an additional layer of protection against vibration transmission. Isolation helps prevent vibrations from being transferred to the supporting structure, reducing the potential for structural damage and minimizing noise generation.

3. Stability and Alignment: Proper alignment and stability of the motor are essential for reducing vibrations. Motor bases provide a secure and stable mounting platform that ensures the motor remains properly aligned during operation. Proper alignment helps reduce vibrations caused by misalignment, unbalanced loads, or belt tension issues. By maintaining stability and alignment, motor bases contribute to smoother motor operation, minimizing vibrations and associated noise.

4. Noise Absorption: In addition to reducing vibrations, motor bases can also help absorb and dampen noise generated by motors. The materials and construction of the base can contribute to noise reduction. For example, motor bases made of sound-absorbing materials or incorporating noise-reducing designs can help mitigate the noise generated by the motor, creating a quieter working environment.

By addressing vibration and noise issues, motor bases contribute to improved equipment performance, reduced maintenance needs, enhanced operator comfort, and increased workplace safety. However, it’s important to note that the effectiveness of a motor base in reducing vibration and noise depends on factors such as the motor size, operating conditions, mounting configuration, and the specific design features of the base.

In summary, motor bases play a vital role in reducing vibration and noise from motors. They dampen vibrations, isolate the motor, provide stability and alignment, and can contribute to noise absorption. By minimizing vibrations and noise, motor bases help protect equipment, structures, and human well-being, ensuring smoother and quieter motor operation.

China OEM Latest Technology Waste Car Motor Oil Refinery Machine Get Base Oil Distillation   with Good quality China OEM Latest Technology Waste Car Motor Oil Refinery Machine Get Base Oil Distillation   with Good quality
editor by CX 2024-03-28

China Good quality Latest Technology Waste Car Motor Oil Refinery Machine Get Base Oil Distillation vacuum pump engine

Product Description

Product Description

Application
JZC waste oil distillation machine heat the waste oil to (from 110ºC to 350ºC) different temperature under high vacuum condition, making Hydrocarbon molecules break out, and re-order combination, forming diesel oil, lubricating base oil etc. JZC machine is very suitable for the small oil refinery company, also for the small oil company who want to make the oil by self.
Features and Advantages 
I.The vacuum system uses the roots pump as the main pump and the rotary vane vacuum pump as the primary pump. Fast start-up, large
pumping speed, stable performance, and high ultimate vacuum of less than 5Pa.
II.Double horizontal vacuum separators, combined with Duplex-Stereo film evaporation technology 
III.Strong ability to remove impurities: ultra-large area cylindrical precision filter element, with high filtration accuracy, easy installation and replacement.
IV.Low-load heating: Adopt advanced internal and external double-tube heat radiation indirect heating technology.
V.Automatic control to realize unattended, safe and stable working. 
VI.Safety interlock protection for oil pump, vacuum pump, heater,keep safely working 
VII.Low noise, easy operation, long maintenance interval, low energy consumption, low operating cost 
VIII.It can be used together with the insulation oil regeneration device, which has the effect of decoloring, deacidification, deoxidation and removing
free carbon and other harmful substances from the oil.

Most 3 obvious advantages of our JZC equipment compared with competitors

1. The warranty period of our equipment is 2 years, and other companies usually only have 1 year.

2.Distillation tank has insulation layer, which has energy-saving effect    3.The cooler is made of stainless steel, which has a longer life. 

JZC machine workflow

 

This is a simple flow chart of JZC. If you want a more detailed flow chart, please contact Sales Manager AmyQian

  Working Steps Of The Machine( Omitted version  )
There are 5 steps from waste oil to base oil.
1.Use press paper filter device filter impurities in waste oil
2.The waste oil leads to the waste oil mixing tank, heat the waste oil to 60-80 ºC and then mix it with sodium hydroxide. When sodium hydroxide is mixed with waste oil, a chemical reaction will occur, flocculation and precipitation.
3.Use press paper filter device filter waste oil again, the waste oil then flows to the distillation tank.
4. Set the temperature, let the distillation tank heat to the set temperature, and distill out water vapor and oil vapor. The distillation temperature reaches 80-110ºC, and water is distilled.The distillation temperature reaches 120-210ºC, and Gasoline and diesel is distilled. The distillation temperature reaches 220-290ºC, and light base oil is distilled. The distillation temperature reaches 300-350ºC, and heavy base oil (Viscosity≥SN150 ) is distilled.
5. The oil is then condensed through a cooler condenser,condensation from vapor state to liquid state. This step is actually the operation of employees opening different valves and pumps. There is no difficulty in operation. Emphasize that the machine comes with a collection tank that can separate different types of oil.

Oil Parameters After Treatment

 

 

Final Product Ratio Percentages Distillation Temperature Vacuum Value
Water 2% 80ºC-110ºC -0.098
Gasoline and diesel  8% 120ºC-210ºC 500Pa
Light base oil  40% 220ºC-290ºC 50-500 Pa
Heavy base oil 45% 300ºC-350ºC 50-500 Pa
Oil Resicudal 5%    
Total 100%    

Detailed Photos

 

 

 

 

 

Project Show

 

Representative of key projects
Panamanian customers personally visited our customer’s factory and obtained oil samples. After returning to Panama, he took the oil sample to the laboratory for testing and placed an order for our JZC equipment. He bought 3 sets JZC in total, and now he has become our agent in South Africa .

 

Customer Visit Our Company

 

 

 

Certifications

 

Company Prrofile :
ZheJiang CHINAMFG ELECTROMECHANICAL CO.LTD.is a professional mechanism manufacturer (oil purifier) from ZheJiang China.The company has a 3000 square meter production workshop with more than 40 staffs and engineers. The company is joint-stock high-tech enterprise, after 10 years of development, company has grown into a comprehensive enterprise, engaging in vacuum oil purifier producing, filter element producing, and Imp&Exp trading. CHINAMFG oil purifier and filter are widely applied in projects of transformer substation, electric department, steel structure, bridge, auto, railway, aviation, chemicals, petroleum etc. The products are exported to more than 30 countries and areas, such as Europe, America, Middle East, Southeast Asia and so on. The product gets the good reputation from the dealer and end user.

FAQ

Q1. What are the heating methods of the machine?
A: The conventional heating method of JZC is electric heating. If you need to customize the burner heating mode, we can also customize it for you.

 

Q2. How about the Installation of the machine?
A: About installation, the installation of the machine is modular and sample.If we send engineer , buyer need to be responsible for engineer’s round-trip airfare, visa, accommodation and his salary 100 dollars /day. With the installation instructions,buyer can also install by themselves. Our Engineers can talk with customers in English video to teach how to install and use the machine.Whether engineers are needed or not depends on the customers themselves.

Q3. What is your terms of payment?
A: Generally, we use T/T, 30% in advance, balance pay after the machine finish.

Q4. How about your delivery time?
A: Generally, JZC-1 (1 ton/day) need 35 workings days to finish. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you customized goods for us?
A: Yes, we can customized according to your flow requirements, the brand requirements of parts used in the machine……..

Q6. If you have any inspection or test for your goods before delivery?
A: Yes, we do the inspection and test before finished goods.

Q7. Can we visit your factory?
A: Yes, we warmly welcome your visiting, and can pick up you at airport or train station.

 

 

 

 

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: ISO9001, CE
Application: Turbine Oil, Lubricant Oil, Engine Oil, Waste Oil
Voltage: 380V
Folw Rate: 1-100 Tons/Day
Color: White, Blue, Gray, Yellow
Warranty: 2 Years
Customization:
Available

|

motor base

Can motor bases accommodate motors with varying horsepower ratings?

Motor bases are designed to accommodate motors with varying horsepower ratings. Here’s a detailed explanation:

Motor bases are versatile mounting platforms that can accommodate a wide range of motors, including those with different horsepower ratings. The horsepower rating of a motor refers to its power output capability and is an important consideration when selecting a motor for a specific application.

Motor bases are typically designed to support a range of motor sizes and power ratings. They are manufactured with load-bearing capacities that can handle motors with varying horsepower requirements. The specific horsepower ratings that a motor base can accommodate will depend on its design, construction, and intended application.

When selecting a motor base, it’s important to consider the horsepower rating of the motor you intend to mount. Ensure that the motor base’s load-bearing capacity is sufficient to support the weight and dynamic forces generated by the motor during operation. Exceeding the load-bearing capacity of the motor base can lead to instability, increased vibrations, and potential safety hazards.

Motor bases are often labeled or specified with their load ratings, which indicate the maximum weight or horsepower they can support. It’s crucial to verify that the motor base’s load rating aligns with or exceeds the horsepower rating of the motor you plan to install.

Additionally, consider other factors such as the specific application requirements, environmental conditions, installation constraints, and any industry or safety standards. These considerations will help ensure that the motor base is suitable for the motor’s horsepower rating and the demands of the application.

It’s worth noting that while motor bases can accommodate motors with varying horsepower ratings, it’s essential to follow the manufacturer’s recommendations and guidelines for proper motor base selection, installation, and usage. Adhering to these guidelines ensures the motor base’s structural integrity, stability, and overall performance.

In summary, motor bases are designed to accommodate motors with varying horsepower ratings. They are manufactured with load-bearing capacities that can support a range of motor sizes and power requirements. When selecting a motor base, verify that its load rating aligns with or exceeds the horsepower rating of the motor being installed. By considering the specific requirements of the motor and the application, you can ensure a well-matched motor base that provides optimal support, stability, and performance.

motor base

How can users troubleshoot common issues related to motor base misalignment?

Troubleshooting common issues related to motor base misalignment can help ensure optimal performance and prevent potential problems. Here’s a detailed explanation:

1. Visual Inspection: Start by visually inspecting the motor base and its alignment with the driven equipment. Look for any obvious signs of misalignment, such as gaps, uneven contact, or skewed positioning. Pay attention to the alignment of coupling or drive belts, as they can indicate misalignment issues as well.

2. Measurements and Alignment Tools: Use precision measurement tools such as dial indicators, laser alignment devices, or straightedges to assess the alignment of the motor base. These tools can provide accurate measurements and help identify misalignment issues. Measure the alignment at multiple points along the motor base and compare the readings to the manufacturer’s recommended tolerances.

3. Check Mounting Bolts and Fasteners: Loose or improperly tightened mounting bolts and fasteners can contribute to motor base misalignment. Ensure that all bolts and fasteners are securely tightened according to the manufacturer’s specifications. If any bolts are found to be loose, tighten them appropriately. However, be cautious not to overtighten, as it can lead to deformation or misalignment of the motor base.

4. Assess Foundation or Mounting Surface: Examine the foundation or mounting surface on which the motor base is installed. Uneven or unstable surfaces can cause misalignment. Check for any irregularities, such as cracks, gaps, or soft spots, that may affect the alignment of the motor base. If necessary, repair or reinforce the foundation to ensure a stable and level mounting surface.

5. Alignment Adjustment: If misalignment is detected, make the necessary adjustments to bring the motor base into proper alignment. This may involve loosening the mounting bolts, adjusting shims or wedges, and repositioning the motor base. Follow the manufacturer’s guidelines or consult alignment experts for specific adjustment procedures based on the type of motor base and alignment method used.

6. Consider Thermal Growth: Account for thermal growth when aligning the motor base. Motors can experience thermal expansion or contraction during operation, which can affect alignment. Consult the manufacturer’s recommendations for thermal growth allowances and adjust the alignment accordingly.

7. Regular Maintenance: Implement a regular maintenance program that includes periodic inspections and realignment of the motor base. Over time, environmental factors, operational stresses, or equipment vibrations can cause misalignment. Regular maintenance helps identify and address misalignment issues before they escalate and lead to more severe problems.

8. Professional Assistance: If troubleshooting and adjustments do not resolve the misalignment issues, or if the alignment task requires specialized knowledge and equipment, seek assistance from alignment professionals or qualified technicians. They have the expertise and tools to accurately diagnose and correct complex misalignment problems.

It’s important to note that proper alignment of the motor base is essential for the smooth and efficient operation of the entire system. Misalignment can result in increased wear and tear, reduced energy efficiency, excessive vibration, premature component failure, and decreased overall performance. By promptly addressing misalignment issues, users can optimize the performance and lifespan of their motor base and associated equipment.

motor base

How does a motor base contribute to the stability and alignment of electric motors?

A motor base plays a crucial role in contributing to the stability and alignment of electric motors in industrial applications. Here’s a detailed explanation:

A motor base, also known as a motor mounting base or motor support base, provides essential support and alignment features that help ensure the stable and properly aligned positioning of electric motors. Here’s how a motor base contributes to stability and alignment:

1. Support and Weight Distribution: A motor base serves as a robust platform to support the weight of the electric motor. It helps distribute the motor’s weight evenly across the base, preventing excessive stress or strain on the motor and its mounting points. By providing adequate support, the motor base helps maintain the motor’s structural integrity and prevents any sagging or tilting that could lead to misalignment.

2. Adjustable Mounting Features: Motor bases often include adjustable features such as slotted holes or bolt patterns that allow for precise alignment of the motor. These adjustment options enable technicians to align the motor with connected equipment, such as pumps, fans, conveyors, or gearboxes. Proper alignment is crucial for efficient power transmission, minimizing wear and tear on the motor and connected components, and reducing the risk of mechanical failures.

3. Rigid Construction: Motor bases are typically constructed from sturdy materials like steel or cast iron, which provide rigidity and stability. The robust construction of the motor base helps absorb and dampen vibrations generated during motor operation, minimizing the transmission of vibrations to the surrounding equipment or structure. This vibration control contributes to the overall stability of the motor and its surrounding components.

4. Alignment Verification: Motor bases often include alignment verification features such as laser alignment systems or dial indicators. These tools assist technicians in precisely aligning the motor with connected equipment. By using these verification methods, technicians can ensure that the alignment is within specified tolerances, further enhancing stability and minimizing the risk of misalignment-related issues.

5. Secure Mounting: Motor bases are designed to securely attach the motor to the base, typically using bolts or fasteners. This secure mounting prevents any movement or shifting of the motor during operation, enhancing stability. It also helps maintain the alignment achieved during the installation process.

By providing support, adjustable alignment features, rigidity, alignment verification, and secure mounting, motor bases contribute significantly to the stability and alignment of electric motors in industrial applications. Proper stability and alignment are essential for optimal motor performance, reduced wear and tear, improved energy efficiency, and prolonged motor lifespan.

When installing a motor base, it’s crucial to follow manufacturer guidelines and ensure proper anchoring to the foundation or supporting structure. This helps maintain the integrity of the motor base and ensures the reliable operation of the motor.

In summary, a motor base is a critical component that contributes to the stability and alignment of electric motors by providing support, alignment adjustability, rigidity, alignment verification, and secure mounting, ultimately enhancing motor performance and reliability.

China Good quality Latest Technology Waste Car Motor Oil Refinery Machine Get Base Oil Distillation   vacuum pump engine	China Good quality Latest Technology Waste Car Motor Oil Refinery Machine Get Base Oil Distillation   vacuum pump engine
editor by CX 2024-02-02

Waste Tyre Pyrolysis En wholesaler gine Tire Pyrolysis Oil to Diesel factory Regenerate Distillation Refinery Plant Machine

Product Description

waste tyre pyrolysis engine tire pyrolysis oil to diesel regenerate distillation refinery plant machine

1.Waste engine oil waste car motor oil refinery to base oil ?
The main technology of waste oil regeneration in abroad is Kleen,Meinken,IFP,KTI,Snamprogetti,DOH,DCH,BERC and Recyclon.etc.New processes that have been applied abroad include ultrafiltration, centrifugal separation, molecular distillation, flocculation, solvent refining, etc.In the late 1980s, two regeneration processes were developed in CZPT .One is distillation-extraction-clay process, which uses ethanol as solvent for extraction; the other is high temperature clay process, which combines distillation and clay treatment in the same process.Recent thin film evaporator – furfural refining-clay process can extract more base oil fractions than conventional vacuum distillation, furfural has better extraction effect than ethanol, and the yield of base oil is higher.
According to the deterioration mechanism and degree of lubricating oil, the regeneration technology of waste engine oil can be divided into re-purification process, fine refining process and re-refining process.

2.Technology of CZPT company

 1) Process flow description

The process of waste oil reduction and regeneration base oil is introduced as follows: Our company specializes in the production of waste oil regeneration equipment and process research and development for more than ten years, and constantly explores and improves the technology. Combining with the advantages and disadvantages of the current equipment process, we focus on the materials in the process of waste oil processing equipment, which are easy to coke at high temperature, have high operating cost and have many potential safety hazards. The problem of high overhaul rate and high technical difficulty has been discussed and studied, and a lot of manpower and material resources have been invested. Through repeated testing and continuous improvement, the problem of easy coking of materials at high temperature has been successfully solved.

 2)Project overview(Examples for reference)
1)Project Name: 18,000T/a waste lubricant recycling project;
2) Nature of the industry: waste resources and recycling of waste materials;
3) Total investment: 20 million yuan
4) CZPT area: 14,000 square meters, construction area 5,120 square meters;
5) CZPT ing area: The whole plant has a CZPT area of 1820 square meters, and the CZPT ing rate is 13%;
6) Number of employees: 30 staff members;
7) Hours of work: 300 days for the whole year, 24 hours for the day, and 7,200 hours for the whole year;

3.Advantages:
1.Low investment, low wastage and high yield.89-96% high recovery rate
2.Can be used as the base oil of international standards, SN150.SN250.SN350
3.Easy to operate
 

4.Main Equipment introduction

1)Distillation tower introduction

Fractionating tower with structured packing

The tower is divided into:

a.In the top of the tower, the product is the first-line oil.;

b.Second-line return and recovery section, the product is CZPT -line oil;

c.Third-line return and recovery section, the product is third-line oil;
2)Tank and warehouse storage

5.The quality of oil from CZPT CZPT er:

 

6.Main product testing index

(Third-line oil) finished product quality inspection standard HVI250
1 Test items Indicators Reference standard
2 Flash point ≥220ºC

GB/T3536-1983   Flash point and flash point determination of 

petroleum products (Cleveland open cup method)

3 Pour point ≤-12ºC GB/T3535-1983  Petroleum products pour point measurement method
4 Chroma 2 GB/T6540-1986  Oil product color measurement method
5

Kinematic viscosity

 (40 degrees)

42-55mm²/s

GB/T265-1988  Kinematic viscosity measurement and dynamic 

viscosity measurement of petroleum products 

6

Kinematic viscosity

 (100 degrees)

Report

GB/T265-1988  Kinematic viscosity measurement and dynamic 

viscosity measurement of petroleum products 

7 Viscosity index ≥100  GB/T1995-1998   Oil Products Viscosity Index Calculation Method
8 Acid value ≤0.03(mgkoh/g)  GB/T264-1983  Oil product acid value measurement method
9

Demulsification 

(54 degrees)

≤10min GB/T7305-2003  Separation of oil and synthetic liquids
10 Water content Trace GB/T260-1997  Oil Products Water Content Measurement Method

7.Packing and Delivering

Used CZPT Oil/Pyrolysis Oil Recycling Plant to Base oil .

Packing Details : CZPT case package of standard export.

Delivery Details : 15-30 days after received the deposit.

We will provide the most reliable, safest mode of transportation, in order to save shipping cost.

We will provide the most reliable, safest mode of transportation, in order to save shipping cost.

8.Successfull Installation

FAQ

1.what process are you using ? 
The process of scraping film evaporator 
2.what is the output parameters of the base oil ? 
we can get international standard base oil ,like SN250. SN150.SN350 . 
3.did you ever build some plants in CZPT ? can we see it ? 
yes ,we have built some waste oil refining to base oil plant ,
you can visit the plant if you come to CZPT . we really welcome you to come to CZPT to visit CZPT plant .
4. do you have professional engineer to support oversea service ?
yes , we have professional engineer to support oversea service .
5.can you supply oversea installation ?
yes ,we can supply oversea installation support

Used Engine Oil Recycling Plant Waste Oi Custom l manufacturer to Diesel Refinery Base Oil Distillation Machine

Product Description

used engine oil recycling plant waste oil to diesel refinery base oil distillation machine

1.Waste engine oil waste car motor oil refinery to base oil ?
The main technology of waste oil regeneration in abroad is Kleen,Meinken,IFP,KTI,Snamprogetti,DOH,DCH,BERC and Recyclon.etc.New processes that have been applied abroad include ultrafiltration, centrifugal separation, molecular distillation, flocculation, solvent refining, etc.In the late 1980s, two regeneration processes were developed in CZPT .One is distillation-extraction-clay process, which uses ethanol as solvent for extraction; the other is high temperature clay process, which combines distillation and clay treatment in the same process.Recent thin film evaporator – furfural refining-clay process can extract more base oil fractions than conventional vacuum distillation, furfural has better extraction effect than ethanol, and the yield of base oil is higher.
According to the deterioration mechanism and degree of lubricating oil, the regeneration technology of waste engine oil can be divided into re-purification process, fine refining process and re-refining process.

2.Technology of CZPT company

 1) Process flow description

The process of waste oil reduction and regeneration base oil is introduced as follows: Our company specializes in the production of waste oil regeneration equipment and process research and development for more than ten years, and constantly explores and improves the technology. Combining with the advantages and disadvantages of the current equipment process, we focus on the materials in the process of waste oil processing equipment, which are easy to coke at high temperature, have high operating cost and have many potential safety hazards. The problem of high overhaul rate and high technical difficulty has been discussed and studied, and a lot of manpower and material resources have been invested. Through repeated testing and continuous improvement, the problem of easy coking of materials at high temperature has been successfully solved.

 2) Production process flowchart

3)Project overview(Examples for reference)

1)Project Name: 18,000T/a waste lubricant recycling project;

2) Nature of the industry: waste resources and recycling of waste materials;

 3) Total investment: 20 million yuan

4) CZPT area: 14,000 square meters, construction area 5,120 square meters;

5) CZPT ing area: The whole plant has a CZPT area of 1820 square meters, and the CZPT ing rate is 13%;

6) Number of employees: 30 staff members;

7) Hours of work: 300 days for the whole year, 24 hours for the day, and 7,200 hours for the whole year;

3.Main Equipment introduction

1)Distillation tower introduction

Fractionating tower with structured packing

The tower is divided into:

a.In the top of the tower, the product is the first-line oil.;

b.Second-line return and recovery section, the product is CZPT -line oil;

c.Third-line return and recovery section, the product is third-line oil;
2)Tank and warehouse storage

4.The quality of oil from CZPT CZPT er:

 

5.Main product testing index

(Third-line oil) finished product quality inspection standard HVI250
1 Test items Indicators Reference standard
2 Flash point ≥220ºC

GB/T3536-1983   Flash point and flash point determination of 

petroleum products (Cleveland open cup method)

3 Pour point ≤-12ºC GB/T3535-1983  Petroleum products pour point measurement method
4 Chroma 2 GB/T6540-1986  Oil product color measurement method
5

Kinematic viscosity

 (40 degrees)

42-55mm²/s

GB/T265-1988  Kinematic viscosity measurement and dynamic 

viscosity measurement of petroleum products 

6

Kinematic viscosity

 (100 degrees)

Report

GB/T265-1988  Kinematic viscosity measurement and dynamic 

viscosity measurement of petroleum products 

7 Viscosity index ≥100  GB/T1995-1998   Oil Products Viscosity Index Calculation Method
8 Acid value ≤0.03(mgkoh/g)  GB/T264-1983  Oil product acid value measurement method
9

Demulsification 

(54 degrees)

≤10min GB/T7305-2003  Separation of oil and synthetic liquids
10 Water content Trace GB/T260-1997  Oil Products Water Content Measurement Method

6.Packing and Delivering

Used CZPT Oil/Pyrolysis Oil Recycling Plant to Base oil .

Packing Details : CZPT case package of standard export.

Delivery Details : 15-30 days after received the deposit.

We will provide the most reliable, safest mode of transportation, in order to save shipping cost.

7.Successfull Installation

FAQ

1.what process are you using ? 
The process of scraping film evaporator 
2.what is the output parameters of the base oil ? 
we can get international standard base oil ,like SN250. SN150.SN350 . 
3.did you ever build some plants in CZPT ? can we see it ? 
yes ,we have built some waste oil refining to base oil plant ,
you can visit the plant if you come to CZPT . we really welcome you to come to CZPT to visit CZPT plant .
4. do you have professional engineer to support oversea service ?
yes , we have professional engineer to support oversea service .
5.can you supply oversea installation ?
yes ,we can supply oversea installation support

Waste Engine Oil to Diesel Refinery Distillation near me Recycling near me shop Machine

Product Description

Waste engine oil to diesel refinery distillation recycling machine

1.Waste engine oil waste car motor oil refinery to base oil ?
The main technology of waste oil regeneration in abroad is Kleen,Meinken,IFP,KTI,Snamprogetti,DOH,DCH,BERC and Recyclon.etc.New processes that have been applied abroad include ultrafiltration, centrifugal separation, molecular distillation, flocculation, solvent refining, etc.In the late 1980s, two regeneration processes were developed in CZPT .One is distillation-extraction-clay process, which uses ethanol as solvent for extraction; the other is high temperature clay process, which combines distillation and clay treatment in the same process.Recent thin film evaporator – furfural refining-clay process can extract more base oil fractions than conventional vacuum distillation, furfural has better extraction effect than ethanol, and the yield of base oil is higher.
According to the deterioration mechanism and degree of lubricating oil, the regeneration technology of waste engine oil can be divided into re-purification process, fine refining process and re-refining process.

2.Technology of CZPT company

 1) Process flow description

The process of waste oil reduction and regeneration base oil is introduced as follows: Our company specializes in the production of waste oil regeneration equipment and process research and development for more than ten years, and constantly explores and improves the technology. Combining with the advantages and disadvantages of the current equipment process, we focus on the materials in the process of waste oil processing equipment, which are easy to coke at high temperature, have high operating cost and have many potential safety hazards. The problem of high overhaul rate and high technical difficulty has been discussed and studied, and a lot of manpower and material resources have been invested. Through repeated testing and continuous improvement, the problem of easy coking of materials at high temperature has been successfully solved.

 2)Project overview(Examples for reference)
1)Project Name: 18,000T/a waste lubricant recycling project;
2) Nature of the industry: waste resources and recycling of waste materials;
3) Total investment: 20 million yuan
4) CZPT area: 14,000 square meters, construction area 5,120 square meters;
5) CZPT ing area: The whole plant has a CZPT area of 1820 square meters, and the CZPT ing rate is 13%;
6) Number of employees: 30 staff members;
7) Hours of work: 300 days for the whole year, 24 hours for the day, and 7,200 hours for the whole year;

3.Advantages:
1.Low investment, low wastage and high yield.89-96% high recovery rate
2.Can be used as the base oil of international standards, SN150.SN250.SN350
3.Easy to operate
 

4.Main Equipment introduction

1)Distillation tower introduction

Fractionating tower with structured packing

The tower is divided into:

a.In the top of the tower, the product is the first-line oil.;

b.Second-line return and recovery section, the product is CZPT -line oil;

c.Third-line return and recovery section, the product is third-line oil;
2)Tank and warehouse storage

5.The quality of oil from CZPT CZPT er:

 

6.Main product testing index

(Third-line oil) finished product quality inspection standard HVI250
1 Test items Indicators Reference standard
2 Flash point ≥220ºC

GB/T3536-1983   Flash point and flash point determination of 

petroleum products (Cleveland open cup method)

3 Pour point ≤-12ºC GB/T3535-1983  Petroleum products pour point measurement method
4 Chroma 2 GB/T6540-1986  Oil product color measurement method
5

Kinematic viscosity

 (40 degrees)

42-55mm²/s

GB/T265-1988  Kinematic viscosity measurement and dynamic 

viscosity measurement of petroleum products 

6

Kinematic viscosity

 (100 degrees)

Report

GB/T265-1988  Kinematic viscosity measurement and dynamic 

viscosity measurement of petroleum products 

7 Viscosity index ≥100  GB/T1995-1998   Oil Products Viscosity Index Calculation Method
8 Acid value ≤0.03(mgkoh/g)  GB/T264-1983  Oil product acid value measurement method
9

Demulsification 

(54 degrees)

≤10min GB/T7305-2003  Separation of oil and synthetic liquids
10 Water content Trace GB/T260-1997  Oil Products Water Content Measurement Method

7.Packing and Delivering

Used CZPT Oil/Pyrolysis Oil Recycling Plant to Base oil .

Packing Details : CZPT case package of standard export.

Delivery Details : 15-30 days after received the deposit.

We will provide the most reliable, safest mode of transportation, in order to save shipping cost.

We will provide the most reliable, safest mode of transportation, in order to save shipping cost.

8.Successfull Installation

FAQ

1.what process are you using ? 
The process of scraping film evaporator 
2.what is the output parameters of the base oil ? 
we can get international standard base oil ,like SN250. SN150.SN350 . 
3.did you ever build some plants in CZPT ? can we see it ? 
yes ,we have built some waste oil refining to base oil plant ,
you can visit the plant if you come to CZPT . we really welcome you to come to CZPT to visit CZPT plant .
4. do you have professional engineer to support oversea service ?
yes , we have professional engineer to support oversea service .
5.can you supply oversea installation ?
yes ,we can supply oversea installation support

Waste Used Oil Fractional Distillation Column Recycling Plant Equip Cheap me supplier nt Machine

Product Description

waste used oil fractional distillation column recycling plant equipment machine

1.Waste engine oil waste car motor oil refinery to base oil ?
The main technology of waste oil regeneration in abroad is Kleen,Meinken,IFP,KTI,Snamprogetti,DOH,DCH,BERC and Recyclon.etc.New processes that have been applied abroad include ultrafiltration, centrifugal separation, molecular distillation, flocculation, solvent refining, etc.In the late 1980s, two regeneration processes were developed in CZPT .One is distillation-extraction-clay process, which uses ethanol as solvent for extraction; the other is high temperature clay process, which combines distillation and clay treatment in the same process.Recent thin film evaporator – furfural refining-clay process can extract more base oil fractions than conventional vacuum distillation, furfural has better extraction effect than ethanol, and the yield of base oil is higher.
According to the deterioration mechanism and degree of lubricating oil, the regeneration technology of waste engine oil can be divided into re-purification process, fine refining process and re-refining process.

2.Technology of CZPT company

 1) Process flow description

The process of waste oil reduction and regeneration base oil is introduced as follows: Our company specializes in the production of waste oil regeneration equipment and process research and development for more than ten years, and constantly explores and improves the technology. Combining with the advantages and disadvantages of the current equipment process, we focus on the materials in the process of waste oil processing equipment, which are easy to coke at high temperature, have high operating cost and have many potential safety hazards. The problem of high overhaul rate and high technical difficulty has been discussed and studied, and a lot of manpower and material resources have been invested. Through repeated testing and continuous improvement, the problem of easy coking of materials at high temperature has been successfully solved.

 2)Project overview(Examples for reference)
1)Project Name: 18,000T/a waste lubricant recycling project;
2) Nature of the industry: waste resources and recycling of waste materials;
3) Total investment: 20 million yuan
4) CZPT area: 14,000 square meters, construction area 5,120 square meters;
5) CZPT ing area: The whole plant has a CZPT area of 1820 square meters, and the CZPT ing rate is 13%;
6) Number of employees: 30 staff members;
7) Hours of work: 300 days for the whole year, 24 hours for the day, and 7,200 hours for the whole year;

3.Advantages:
1.Low investment, low wastage and high yield.89-96% high recovery rate
2.Can be used as the base oil of international standards, SN150.SN250.SN350
3.Easy to operate
 

4.Main Equipment introduction

1)Distillation tower introduction

Fractionating tower with structured packing

The tower is divided into:

a.In the top of the tower, the product is the first-line oil.;

b.Second-line return and recovery section, the product is CZPT -line oil;

c.Third-line return and recovery section, the product is third-line oil;
2)Tank and warehouse storage

5.The quality of oil from CZPT CZPT er:

 

6.Main product testing index

(Third-line oil) finished product quality inspection standard HVI250
1 Test items Indicators Reference standard
2 Flash point ≥220ºC

GB/T3536-1983   Flash point and flash point determination of 

petroleum products (Cleveland open cup method)

3 Pour point ≤-12ºC GB/T3535-1983  Petroleum products pour point measurement method
4 Chroma 2 GB/T6540-1986  Oil product color measurement method
5

Kinematic viscosity

 (40 degrees)

42-55mm²/s

GB/T265-1988  Kinematic viscosity measurement and dynamic 

viscosity measurement of petroleum products 

6

Kinematic viscosity

 (100 degrees)

Report

GB/T265-1988  Kinematic viscosity measurement and dynamic 

viscosity measurement of petroleum products 

7 Viscosity index ≥100  GB/T1995-1998   Oil Products Viscosity Index Calculation Method
8 Acid value ≤0.03(mgkoh/g)  GB/T264-1983  Oil product acid value measurement method
9

Demulsification 

(54 degrees)

≤10min GB/T7305-2003  Separation of oil and synthetic liquids
10 Water content Trace GB/T260-1997  Oil Products Water Content Measurement Method

7.Packing and Delivering

Used CZPT Oil/Pyrolysis Oil Recycling Plant to Base oil .

Packing Details : CZPT case package of standard export.

Delivery Details : 15-30 days after received the deposit.

We will provide the most reliable, safest mode of transportation, in order to save shipping cost.

We will provide the most reliable, safest mode of transportation, in order to save shipping cost.

8.Successfull Installation

FAQ

1.what process are you using ? 
The process of scraping film evaporator 
2.what is the output parameters of the base oil ? 
we can get international standard base oil ,like SN250. SN150.SN350 . 
3.did you ever build some plants in CZPT ? can we see it ? 
yes ,we have built some waste oil refining to base oil plant ,
you can visit the plant if you come to CZPT . we really welcome you to come to CZPT to visit CZPT plant .
4. do you have professional engineer to support oversea service ?
yes , we have professional engineer to support oversea service .
5.can you supply oversea installation ?
yes ,we can supply oversea installation support