Oval Flange Units
The UCFL two bolt flange device (RHP SFT and MSFT sequence) consists of a bearing insert with a spherical outer diameter in a cast iron housing. The bearing is normally set to the shaft by means of two set screws in the extended portion of the internal ring.
Materials:
Housing, grey cast iron.
CZPT, ball-bearing steel 100Cr6.
Seal, rubber NBR.
Model:
Housing, painted.
Observe:
Pillow block bearings consist of a sealed single-row ball bearing with a spherical outer ring which is mounted in a housing. Due to the fact of the spherical outer area of the bearing, shaft misalignment can be compensated for. The bearings are manufactured with a plus tolerance. This final results in changeover or press matches when using shafts with h-tolerances. The shaft is secured by grub screws on the interior ring.
In typical purposes, pillow block bearings are routine maintenance-cost-free owing to the life time lubrication. In hard environmental problems re-lubrication can be carried out over the grease nipple.
All housing dimensions are nominal dimensions for which the common casting tolerances should be taken into thing to consider.
Temperature range:
-15 °C to +a hundred °C.
| Device No. | Shaft Dia | Dimensions (mm) | Bolt measurement | CZPT No. | Housing No. | Mass (kg) | ||||||||||
| d | H | J | L | A2 | A1 | A | E | N | S | A4 | ||||||
| (in.) | (mm) | |||||||||||||||
| UCFL201S | 12 | ninety nine | 76.five | 57 | 15 | eleven | 24.five | 30.9 | eleven.5 | 11.5 | — | M10 | UC201S | FL203 | .37 | |
| 201-8S | 1/2 | 201-8S | ||||||||||||||
| 202S | 15 | 202S | .36 | |||||||||||||
| 202-10S | five/8 | 202-10S | ||||||||||||||
| 203S | 17 | 203S | .35 | |||||||||||||
| 203-11S | 11/16 | 203-11S | ||||||||||||||
| UCFL201 | 12 | 113 | ninety | sixty | fifteen | 11 | 25.5 | 33.3 | 11.5 | twelve.seven | 37.5 | M10 | UC201 | FL204 | .47 | |
| 201-8 | one/two | 201-eight | ||||||||||||||
| 202 | fifteen | 202 | .forty five | |||||||||||||
| 202-10 | 5/eight | 202-ten | ||||||||||||||
| 203 | 17 | 203 | .44 | |||||||||||||
| 203-11 | eleven/sixteen | 203-11 | ||||||||||||||
| 204-twelve | 3/4 | 204-12 | ||||||||||||||
| 204 | twenty | 204 | .42 | |||||||||||||
| UCFL205-14 | 7/eight | 130 | ninety nine | sixty eight | sixteen | thirteen | 27 | 35.7 | eleven.five | fourteen.three | forty | M10 | UC205-fourteen | FL205 | ||
| 205-fifteen | 15/sixteen | 205-fifteen | ||||||||||||||
| 205 | twenty five | 205 | .sixty one | |||||||||||||
| 205-16 | one | 205-16 | ||||||||||||||
| UCFL206-eighteen | one-one/eight | 148 | 117 | 80 | eighteen | 13 | 31 | forty.2 | eleven.five | fifteen.nine | forty four | M10 | UC206-18 | FL206 | ||
| 206 | thirty | 206 | .nine | |||||||||||||
| 206-19 | one-3/sixteen | 206-19 | ||||||||||||||
| 206-twenty | 1-1/four | 206-twenty | ||||||||||||||
| UCFL207-20 | 1-1/four | 161 | 130 | ninety | 19 | 14 | 34 | forty four.four | 14 | seventeen.5 | 48.5 | M12 | UC207-twenty | FL207 | ||
| 207-21 | 1-5/sixteen | 207-21 | ||||||||||||||
| 207-22 | one-three/eight | 207-22 | ||||||||||||||
| 207 | 35 | 207 | one.21 | |||||||||||||
| 207-23 | one-7/16 | 207-23 | ||||||||||||||
| UCFL208-24 | 1-1/2 | one hundred seventy five | 144 | one hundred | 21 | fourteen | 36 | 51.2 | fourteen | 19 | 55 | M12 | UC208-24 | FL208 | ||
| 208-25 | 1-nine/sixteen | 208-25 | ||||||||||||||
| 208 | forty | 208 | one.55 | |||||||||||||
| UCFL209-26 | 1-five/eight | 188 | 148 | 108 | 22 | 16 | 38 | 52.2 | eighteen | 19 | fifty seven | M16 | UC209-26 | FL209 | ||
| 209-27 | one-eleven/16 | 209-27 | ||||||||||||||
| 209-28 | 1-three/4 | 209-28 | ||||||||||||||
| 209 | forty five | 209 | 1.87 | |||||||||||||
| UCFL210-30 | one-seven/8 | 197 | 157 | a hundred and fifteen | 22 | 16 | 40 | fifty four.6 | eighteen | 19 | 60 | M16 | UC210-thirty | FL210 | ||
| 210-31 | one-fifteen/sixteen | 210-31 | ||||||||||||||
| 210 | 50 | 210 | 2.sixteen | |||||||||||||
| 210-32 | two | 210-32 | ||||||||||||||
| UCFL211-32 | two | 224 | 184 | 130 | 25 | 18 | 43 | 58.4 | 18 | 22.2 | sixty four | M16 | UC211-32 | FL211 | ||
| 211-34 | two-1/8 | 211-34 | ||||||||||||||
| 211 | fifty five | 211 | 2.89 | |||||||||||||
| 211-35 | 2-3/16 | 211-35 | ||||||||||||||
| UCFL212-36 | 2-one/4 | 250 | 202 | a hundred and forty | 29 | 18 | forty eight | sixty eight.7 | 18 | 25.four | 74.five | M16 | UC212-36 | FL212 | ||
| 212 | sixty | 212 | 3.75 | |||||||||||||
| 212-38 | two-3/eight | 212-38 | ||||||||||||||
| 212-39 | 2-seven/sixteen | 212-39 | ||||||||||||||
| UCFL213-forty | two-one/two | 258 | 210 | a hundred and fifty five | thirty | twenty | 50 | sixty nine.seven | 23 | twenty five.4 | 79 | M20 | UC213-40 | FL213 | ||
| 213 | 65 | 213 | four.sixty eight | |||||||||||||
| UCFL214-forty four | 2-three/4 | 265 | 216 | a hundred and sixty | 31 | 20 | 54 | 75.four | 23 | thirty..2 | — | M20 | UC214-44 | FL214 | ||
| 214 | 70 | 214 | five.26 | |||||||||||||
| UCFL215-47 | 2-15/sixteen | 275 | 225 | 164 | 34 | 22 | 55 | seventy eight.five | 23 | 33.three | M20 | UC215-forty seven | FL215 | |||
| 215 | 75 | — | 215 | |||||||||||||
| 215-forty eight | 3 | 215-48 | 5.38 | |||||||||||||
| UCFL216 | 80 | 290 | 233 | one hundred eighty | 34 | 22 | 58 | eighty three.three | twenty five | 33.three | — | M22 | UC216 | FL216 | 6.seventy six | |
| UCFL217-fifty two | 3-one/4 | 305 | 248 | a hundred ninety | 36 | 22 | 63 | 87.6 | twenty five | 34.1 | — | M22 | UC217-fifty two | FL217 | ||
| 217 | eighty five | 217 | 8.48 | |||||||||||||
| UCFL218-56 | 3-one/two | 320 | 265 | 205 | 40 | 23 | sixty eight | ninety six.three | 25 | 39.7 | — | M22 | UC218-56 | FL218 | ||
| 218 | 90 | 218 | 10.three | |||||||||||||
ZheJiang DSR CZPT Co.,ltd is a expert maker of bearings, all types of rollers, with a lot more than 15 years encounter. Our manufacturing facility is in ZheJiang and our export place of work is in ZheJiang . We have set up prolonged-phrase cooperative relations with customers in Canada, Mexico, the United States and other countries and regions. So we also hope to cooperate with you! We feel that our stable quality and competitive price tag will support you get a lot more marketplace and greater development!
Right after years of development, our company has shaped a set of effective and cooperative management types and our business philosophy. “Think about Much more From the CZPTer’s Aspect” is our provider basic principle. As a qualified domestic & international trading organization, our products are complete and plentiful. They are broadly utilised in metallurgy, mining, petroleum, equipment, electric energy, paper, grass and other fields. We sincerely hope that there will be more customers from distinct places to cooperate with our firm, and we will offer prime provider.
We are quite confident in our products, and we are certain that we can earn your trust!
Q:What the MOQ of your company?
A: In stock, MOQ is 1pc.
Q:Could you settle for OEM and personalize?
A:Indeed, we can customize for you in accordance to sample or drawing.
Q:Could you source sample for cost-free?
A:Sure, we can provide sample for free of charge, you only want to spend for the shipping and delivery value.
Q:Is you organization manufacturing unit or Trade Firm?
A:We have our own manufacturing facility our type is factory + trade.
Q:Could you tell me the substance of your bearing?
A:We have chrome metal, and stainless metal, ceramic and carbon steel.
Q:Could you offer you doorway to doorway provider?
A:Indeed, by express (DHL, FEDEX, TNT, EMS, 4-10 times to your metropolis.)
Q:What is your business payment terms?
A:T/T. Western Union, PayPal
Small purchase TT, one hundred% entire payment just before shipping.
If huge order we can do fifty% down payment or thirty% down payment 70% Stability payment on copy of B/L, relies upon on the get.
Q:Could you notify me the supply time of your items?
A:If inventory, in 7days or foundation on your buy quantity.
