Tag Archives: motor car

China 12V DC Planetary gearbox brushless motor for smart meters car motor

Product Description

12V dc Planetary gearbox brushless motor for sensible meters 

Primary Features

one.16mm Planetary Gearsbox furthermore 16 brushless coreless motor
two.Little measurement dc equipment motor with reduced velocity and large torque
three.16mm gear motor give .3Nm torque and far more dependable
4.Appropriate to small diameter, lower noise and big torque software
five.Reduction ratio: 4,sixteen,29,sixty two,104,198,231,370,455,690,850,1996,3571

Motor Specialized Info

Motor model no. Rated voltage No-load pace No-load present Rated velocity Rated torque Rated present Output electricity Stall torque Stall current
VDC r&solmin mA r&solmin g.cm mA W g.cm A
TEC1636-12120 twelve 12000 80 10000 45 600 five. 220 3.
TEC1636-24120 24 12000 sixty 7300 eighty 500 six. 230 one.8

Gear motor technical data  GMP16-TEC1636-12120-xxx

Reduction ratio 4 sixteen 29 62 104 198 231 370 850 1996
Length &lparmm) fifteen.5  18.7 18.seven 22.4 22.four  26 26 26 26 29.7
No-load velocity &lparrpm) 2700 seven hundred 400 180 one hundred ten fifty five  45 thirty 13 5
Rated pace &lparrpm) 2200 600 320 one hundred eighty 110 fifty five 40 27 11 4.five
Rated torque &lparkg.cm) .one .4 .7 one.5 two.8 three three 3 3 three
Max.momentary tolerance torque &lparkg.cm) .5 two three eight 9 9 nine 9 9 9

Equipment motor complex data  GMP16-TEC1636-24120-xxx

Reduction ratio four 16 29 62 104 198 231 370 850 1996
Duration &lparmm) fifteen.5 eighteen.7 eighteen.seven 22.4 22.4  26 26 26 26 29.seven
No-load speed &lparrpm) 2700 700 four hundred one hundred eighty one hundred ten 55  45 30 thirteen five
Rated velocity &lparrpm) 1600 430 240 a hundred sixty five forty five 40 twenty five eleven 4.5
Rated torque &lparkg.cm) .2 .seven one.3 two.nine three 3 three 3 three 3
Max.momentary tolerance torque &lparkg.cm) .five 2 three 8 nine nine nine 9 9 nine

Product Software

 Applications:
Company Machines: ATM, Copiers and Scanners, Forex Managing, Stage of Sale, Printers, Vending Machines.
Foods and Beverage: Beverage Dispensing, Hand Blenders, Blenders, Mixers, Coffee Equipment, Food Processors, Juicers, Fryers, Ice Makers, Soy Bean Milk Makers.
House Entertainment and Gaming: Gaming Machines, Video clip Online games, Optical Disk Drives, RC and Electricity Toys.
Property Technologies: Home Ventilation, Air Purifiers and Dehumidifiers, Selection Hoods, Washers and Dryers, Fridges, Dishwashers, Flooring Treatment, Whirlpool and Spa, Showers, Sensible Metering, Coffee Devices.
Lawn and Yard: Lawn Mowers, Snow Blowers, Trimmers, Leaf Blowers.
Individual Treatment: Hair Chopping, Hair Treatment, Massagers.
Power Equipment: Drills and Motorists, Sanders, Grinders, Polishers, Saws.
Digicam and Optical: Online video, Cameras, Projectors.

 

Packing & Delivery
Packaging: solitary carton packing, 100 items for each box.
Shipping time:
DHL: 3-5 working times &semi
UPS: 5-7 doing work times&semi
TNT: 5-7 operating days&semi
FedEx: 7-9 doing work times&semi
EMS: twelve-fifteen functioning times&semi
By Sea: Is dependent on which place

Our Company

TT Motor &lparHK) Industrial Co., Ltd has been specializing in bldc motor,brushless motor,stepper motor,dc motor,electrical motor,micro motors, geared motors and their respective areas because 2006.

Our products are broadly utilised in amusement systems, cars, home and industrial appliances and tools and many other people. Our products are reliable and extended-long lasting, and backed by several years of encounter. We export ninety eight&percnt of our output globally. 

By leveraging our hard-gained popularity for honesty, dependability and good quality, TT Motor aims to continue as a pioneer in the sales abroad by searching for international partners. If your company is an conclude-consumer of micro-motors, a distributor or an agent, remember to get in touch with us. We look forward to currently being CZPT to function collectively with you in the near potential.

FAQ

Q: How to order&quest
A: ship us inquiry &rightarrow receive our quotation &rightarrow negotiate details &rightarrow confirm the sample &rightarrow sign agreement&soldeposit &rightarrow mass production &rightarrow cargo prepared &rightarrow balance&soldelivery &rightarrow further cooperation.
Q: How about Sample get&quest
A: Sample is offered for you. please make contact with us for particulars.  Our website:ttmotor.en.produced-in-china.com
Q: Which shipping way is avaliable&quest
A: DHL, UPS, FedEx, TNT, EMS, China Publish,Sea are obtainable.The other shipping and delivery methods are also accessible, make sure you make contact with us if you need ship by the other delivery way. 
Q: How lengthy is the offering&quest
A: Devliver time relies upon on the amount you purchase. Generally it normally takes 15-25 working days.
Q: My bundle has lacking products. What can I do&quest
A: Remember to speak to our assistance team and we will affirm your purchase with the bundle contents.We apologize for any inconveniences. 
Q: How to validate the payment&quest
A: We accept payment by T&solT, PayPal, the other payment methods also could be acknowledged,Remember to contact us before you pay out by the other payment methods. Also thirty-fifty&percnt deposit is obtainable, the stability cash should be paid prior to shipping.

US $6-20
/ Piece
| 		50 Pieces

(Min. Order)

###

Application: Industrial, Car, Power Tools
Operating Speed: Low Speed
Excitation Mode: Permanent Magnet
Function: Control
Casing Protection: Protection Type
Number of Poles: 4

###

Samples:
US$ 18/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

1.16mm Planetary Gearsbox plus 16 brushless coreless motor
2.Small size dc gear motor with low speed and big torque
3.16mm gear motor provide 0.3Nm torque and more reliable
4.Suitable to small diameter, low noise and big torque application
5.Reduction ratio: 4,16,29,62,104,198,231,370,455,690,850,1996,3027

###

Motor model no. Rated voltage No-load speed No-load current Rated speed Rated torque Rated current Output power Stall torque Stall current
VDC r/min mA r/min g.cm mA W g.cm A
TEC1636-12120 12 12000 80 10000 45 600 5.0 220 3.0
TEC1636-24120 24 12000 60 7300 80 500 6.0 230 1.8

###

Reduction ratio 4 16 29 62 104 198 231 370 850 1996
Length (mm) 15.5  18.7 18.7 22.4 22.4  26 26 26 26 29.7
No-load speed (rpm) 2700 700 400 180 110 55  45 30 13 5
Rated speed (rpm) 2200 600 320 180 110 55 40 27 11 4.5
Rated torque (kg.cm) 0.1 0.4 0.7 1.5 2.8 3 3 3 3 3
Max.momentary tolerance torque (kg.cm) 0.5 2 3 8 9 9 9 9 9 9

###

Reduction ratio 4 16 29 62 104 198 231 370 850 1996
Length (mm) 15.5 18.7 18.7 22.4 22.4  26 26 26 26 29.7
No-load speed (rpm) 2700 700 400 180 110 55  45 30 13 5
Rated speed (rpm) 1600 430 240 100 65 45 40 25 11 4.5
Rated torque (kg.cm) 0.2 0.7 1.3 2.9 3 3 3 3 3 3
Max.momentary tolerance torque (kg.cm) 0.5 2 3 8 9 9 9 9 9 9

###

 Applications:
Business Machines: ATM, Copiers and Scanners, Currency Handling, Point of Sale, Printers, Vending Machines.
Food and Beverage: Beverage Dispensing, Hand Blenders, Blenders, Mixers, Coffee Machines, Food Processors, Juicers, Fryers, Ice Makers, Soy Bean Milk Makers.
Home Entertainment and Gaming: Gaming Machines, Video Games, Optical Disk Drives, RC and Power Toys.
Home Technologies: Home Ventilation, Air Purifiers and Dehumidifiers, Range Hoods, Washers and Dryers, Refrigerators, Dishwashers, Floor Care, Whirlpool and Spa, Showers, Smart Metering, Coffee Machines.
Lawn and Garden: Lawn Mowers, Snow Blowers, Trimmers, Leaf Blowers.
Personal Care: Hair Cutting, Hair Care, Massagers.
Power Tools: Drills and Drivers, Sanders, Grinders, Polishers, Saws.
Camera and Optical: Video, Cameras, Projectors.

###

Q: How to order?
A: send us inquiry → receive our quotation → negotiate details → confirm the sample → sign contract/deposit → mass production → cargo ready → balance/delivery → further cooperation.
Q: How about Sample order?
A: Sample is available for you. please contact us for details.  Our website:ttmotor.en.made-in-china.com
Q: Which shipping way is avaliable?
A: DHL, UPS, FedEx, TNT, EMS, China Post,Sea are available.The other shipping ways are also available, please contact us if you need ship by the other shipping way. 
Q: How long is the delivering?
A: Devliver time depends on the quantity you order. Usually it takes 15-25 working days.
Q: My package has missing products. What can I do?
A: Please contact our support team and we will confirm your order with the package contents.We apologize for any inconveniences. 
Q: How to confirm the payment?
A: We accept payment by T/T, PayPal, the other payment ways also could be accepted,Please contact us before you pay by the other payment ways. Also 30-50% deposit is available, the balance money should be paid before shipping.
US $6-20
/ Piece
| 		50 Pieces

(Min. Order)

###

Application: Industrial, Car, Power Tools
Operating Speed: Low Speed
Excitation Mode: Permanent Magnet
Function: Control
Casing Protection: Protection Type
Number of Poles: 4

###

Samples:
US$ 18/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

1.16mm Planetary Gearsbox plus 16 brushless coreless motor
2.Small size dc gear motor with low speed and big torque
3.16mm gear motor provide 0.3Nm torque and more reliable
4.Suitable to small diameter, low noise and big torque application
5.Reduction ratio: 4,16,29,62,104,198,231,370,455,690,850,1996,3027

###

Motor model no. Rated voltage No-load speed No-load current Rated speed Rated torque Rated current Output power Stall torque Stall current
VDC r/min mA r/min g.cm mA W g.cm A
TEC1636-12120 12 12000 80 10000 45 600 5.0 220 3.0
TEC1636-24120 24 12000 60 7300 80 500 6.0 230 1.8

###

Reduction ratio 4 16 29 62 104 198 231 370 850 1996
Length (mm) 15.5  18.7 18.7 22.4 22.4  26 26 26 26 29.7
No-load speed (rpm) 2700 700 400 180 110 55  45 30 13 5
Rated speed (rpm) 2200 600 320 180 110 55 40 27 11 4.5
Rated torque (kg.cm) 0.1 0.4 0.7 1.5 2.8 3 3 3 3 3
Max.momentary tolerance torque (kg.cm) 0.5 2 3 8 9 9 9 9 9 9

###

Reduction ratio 4 16 29 62 104 198 231 370 850 1996
Length (mm) 15.5 18.7 18.7 22.4 22.4  26 26 26 26 29.7
No-load speed (rpm) 2700 700 400 180 110 55  45 30 13 5
Rated speed (rpm) 1600 430 240 100 65 45 40 25 11 4.5
Rated torque (kg.cm) 0.2 0.7 1.3 2.9 3 3 3 3 3 3
Max.momentary tolerance torque (kg.cm) 0.5 2 3 8 9 9 9 9 9 9

###

 Applications:
Business Machines: ATM, Copiers and Scanners, Currency Handling, Point of Sale, Printers, Vending Machines.
Food and Beverage: Beverage Dispensing, Hand Blenders, Blenders, Mixers, Coffee Machines, Food Processors, Juicers, Fryers, Ice Makers, Soy Bean Milk Makers.
Home Entertainment and Gaming: Gaming Machines, Video Games, Optical Disk Drives, RC and Power Toys.
Home Technologies: Home Ventilation, Air Purifiers and Dehumidifiers, Range Hoods, Washers and Dryers, Refrigerators, Dishwashers, Floor Care, Whirlpool and Spa, Showers, Smart Metering, Coffee Machines.
Lawn and Garden: Lawn Mowers, Snow Blowers, Trimmers, Leaf Blowers.
Personal Care: Hair Cutting, Hair Care, Massagers.
Power Tools: Drills and Drivers, Sanders, Grinders, Polishers, Saws.
Camera and Optical: Video, Cameras, Projectors.

###

Q: How to order?
A: send us inquiry → receive our quotation → negotiate details → confirm the sample → sign contract/deposit → mass production → cargo ready → balance/delivery → further cooperation.
Q: How about Sample order?
A: Sample is available for you. please contact us for details.  Our website:ttmotor.en.made-in-china.com
Q: Which shipping way is avaliable?
A: DHL, UPS, FedEx, TNT, EMS, China Post,Sea are available.The other shipping ways are also available, please contact us if you need ship by the other shipping way. 
Q: How long is the delivering?
A: Devliver time depends on the quantity you order. Usually it takes 15-25 working days.
Q: My package has missing products. What can I do?
A: Please contact our support team and we will confirm your order with the package contents.We apologize for any inconveniences. 
Q: How to confirm the payment?
A: We accept payment by T/T, PayPal, the other payment ways also could be accepted,Please contact us before you pay by the other payment ways. Also 30-50% deposit is available, the balance money should be paid before shipping.

How to Assemble a Planetary Motor

A Planetary Motor uses multiple planetary surfaces to produce torque and rotational speed. The planetary system allows for a wide range of gear reductions. Planetary systems are particularly effective in applications where higher torques and torque density are needed. As such, they are a popular choice for electric vehicles and other applications where high-speed mobility is required. Nevertheless, there are many benefits associated with using a planetary motor. Read on to learn more about these motors.

VPLite

If you’re looking to replace the original VP, the VPLite has a similar output shaft as the original. This means that you can mix and match your original gear sets, including the input and output shafts. You can even mix metal inputs with plastic outputs. Moreover, if you decide to replace the gearbox, you can easily disassemble the entire unit and replace it with a new one without losing any output torque.
Compared to a planetary motor, a spur gear motor uses fewer gears and is therefore cheaper to produce. However, the latter isn’t suitable for high-torque applications. The torque produced by a planetary gearmotor is evenly distributed, which makes it ideal for applications that require higher torque. However, you may have to compromise on the torque output if you’re looking for a lightweight option.
The VersaPlanetary Lite gearbox replaces the aluminum ring gear with a 30% glass-filled nylon gear. This gearbox is available in two sizes, which means you can mix and match parts to get a better gear ratio. The VPLite gearbox also has a female 5mm hex output shaft. You can mix and match different gearboxes and planetary gearboxes for maximum efficiency.
Motor

VersaPlanetary

The VersaPlanetary is a highly versatile planetary motor that can be mounted in a variety of ways. Its unique design includes a removable shaft coupler system that makes it simple to swap out the motor with another. This planetary motor mounts in any position where a CIM motor mounts. Here’s how to assemble the motor. First, remove the hex output shaft from the VersaPlanetary output stage. Its single ring clip holds it in place. You can use a drill press to drill a hole into the output shaft.
After mounting the gearbox, you can then mount the motor. The mounting hardware included with the VersaPlanetary Planetary Motor comes with four 10-32 threaded holes on a two-inch bolt circle. You can use these holes to mount your VersaPlanetary on a CIM motor or a CIM-compatible motor. Once assembled, the VersaPlanetary gearbox has 72 different gear ratios.
The VersaPlanetary gearbox is interchangeable with regular planetary gearboxes. However, it does require additional parts. You can purchase a gearbox without the motor but you’ll need a pinion. The pinion attaches to the shaft of the motor. The gearbox is very sturdy and durable, so you won’t have to worry about it breaking or wearing out.

Self-centering planetary gears

A planetary motor is a simple mechanical device that rotates around a axis, with the planets moving around the shaft in a radial direction. The planets are positioned so that they mesh with both the sun gear and the output gears. The carrier 48 is flexibly connected to the drive shaft and can move depending on the forces exerted by the planet gears. In this way, the planets can always be in the optimal mesh with the output gears and sun gear.
The first step in developing a planetary gear motor is to identify the number of teeth in each planet. The number of teeth should be an integer. The tooth diameters of the planets should mesh with each other and the ring. Typically, the teeth of one planet must mesh with each other, but the spacing between them must be equal or greater than the other. This can be achieved by considering the tooth count of each planet, as well as the spacing between planets.
A second step is to align the planet gears with the output gears. In a planetary motor, self-centering planetary gears must be aligned with both input and output gears to provide maximum torque. For this to be possible, the planet gears must be connected with the output shaft and the input shaft. Similarly, the output shaft should also be able to align with the input gear.
Motor

Encoders

A planetary geared motor is a DC motor with a planetary gearbox. The motor can be used to drive heavy loads and has a ratio of 104:1. The shaft speed is 116rpm when it is unloaded. A planetary gearbox has a low backlash and is often used in applications that need high torque. Planetary Motor encoders can help you keep track of your robot’s position or speed.
They are also able to control motor position and speed with precision. Most of them feature high resolution. A 0.18-degree resolution encoder will give you a minimum of 2000 transitions per rotation between outputs A and B. The encoder is built to industrial standards and has a sturdy gearbox to avoid damage. The encoder’s robust design means it will not stall when the motor reaches its maximum speed.
There are many advantages to a planetary motor encoder. A high-quality one will not lose its position or speed even if it’s subject to shocks. A good quality planetary motor will also last a long time. Planetary motors are great for resale or for your own project. If you’re considering buying a planetary motor, consider this information. It’ll help you decide if a particular model is right for your needs.

Cost

There are several advantages of planetary motors. One of the biggest is their cost, but they can also be used in many different applications. They can be combined with a variety of gearboxes, and are ideal for various types of robots, laboratory automation, and production applications. Planetary gearboxes are available in many different materials, and plastic planetary gearboxes are an economical alternative. Plastic gearboxes reduce noise at higher speeds, and steel input stage gears are available for high torques. A modified lubrication system can help with difficult operating conditions.
In addition to being more durable, planetary motors are much more efficient. They use fewer gears, which lowers the overall cost of production. Depending on the application, a planetary motor can be used to move a heavy object, but is generally less expensive than its counterpart. It is a better choice for situations where the load is relatively low and the motor is not used frequently. If you need a very high torque output, a planetary motor may be the better option.
Planetary gear units are a good choice for applications requiring high precision, high dynamics, and high torque density. They can be designed and built using TwinCAT and TC Motion Designer, and are delivered as complete motor and gear unit assemblies. In a few simple steps, you can calculate the torque required and compare the costs of different planetary gear units. You can then choose the best model for your application. And because planetary gear units are so efficient, they are a great option for high-end industrial applications.
Motor

Applications

There are several different applications of the planetary motor. One such application is in motion control. Planetary gearboxes have many benefits, including high torque, low backlash, and torsional stiffness. They also have an extremely compact design, and can be used for a variety of applications, from rack and pinion drives to delta robotics. In many cases, they are less expensive to manufacture and use than other types of motors.
Another application for planetary gear units is in rotary tables. These machines require high precision and low backlash for their precise positioning. Planetary gears are also necessary for noise reduction, which is a common feature in rotary tables. High precision planetary gears can make the height adjustment of OP tables a breeze. And because they are extremely durable and require low noise, they are a great choice for this application. In this case, the planetary gear is matched with an AM8000 series servomotor, which gives a wide range of choices.
The planetary gear transmission is also widely used in helicopters, automobiles, and marine applications. It is more advanced than a countershaft drive, and is capable of higher torque to weight ratios. Other advantages include its compact design and reduced noise. A key concern in the development of this type of transmission is to minimize vibration. If the output of a planetary gear transmission system is loud, the vibration caused by this type of drive system may be too loud for comfort.

China 12V DC Planetary gearbox brushless motor for smart meters car motor China 12V DC Planetary gearbox brushless motor for smart meters car motor
editor by czh 2023-01-09

China Z52dpn2460-30s 24V 52mm 60W Planetary Gear DC Motor with Brush car motor

Item Description

Product Description

Z52dpn2460-30s 24V 52mm 60W Planetary Gear DC Motor with Brush

It has the features of small measurement, light weight, higher bearing capacity, lengthy support daily life, clean procedure, low sound, large output torque, large speed ratio, high effectiveness and secure performance. It has the attributes of electrical power split and multi-tooth meshing.

Mark: The voltage, speed and electrical power of the motor can be customized in accordance to the specifications underneath the authorized circumstance of adoptable dimendion.

Item Parameters

Far more possibilities:

Development: BRUSH / BRUSHLESS
MOTOR Outside DIAMETER: 32mm / 42mm / 52mm / 62mm / 72mm / 82mm / 105 mm / 120mm
PLANETARY GEARBOX DIAMETER: 32mm / 42mm / 52mm / 62mm / 72mm / 82mm / a hundred and five mm / 120mm
Traditional items:62mm motor match with 62mm gearbox.
Customized merchandise: 62mm motor match with 52mm gearbox, 72mm motor match with 120mm gearbox (instance)
VOLTAGE: 12 V / 24 V / forty eight V
RATED Electrical power (watts): ten/ 15 / 20 / twenty five / forty / 60 / 90 / one hundred twenty / one hundred fifty / 180 / 200 / three hundred ……750(MAX)
RATED Pace(rpm): 450/540/750/one thousand/1500/2000/2500/3000 (can be tailored)
Security Quality: IP 20 / IP forty four / IP 55 / IP sixty five (According to buyer ask for)

Equipment RATIO:

 A single Stage Two phase 3 Stage
3.sixty five/5.36/6.55/8.sixty three thirteen.fifty three/18.92/24.sixty five/28.05/33.ninety two/44.sixty nine/58.22 67.08……392.ninety eight
Substantial velocity Medium velocity Lower speed
Output Torque Variety:.16 N.m—three hundred N.m ( can be tailored)
SHAFT: Diameter variety:6 mm-32mm, crucial-way variety / D-reduce variety / Bare sort ( can be customized)
Components: Encoder/ Brake / Connector

 

Our Advantages

 

Packaging & Delivery

Export Normal Carton Packaging

Purposes

Huge Precision Equipment Tools, Light Market and Textile Machinery, Health care Gear, Instrument, Car, Ship, Weapon and Aerospace Industries, etc.

US $38.5-63.9
/ Piece
| 		1 Piece

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Adjust Speed
Excitation Mode: Permanent Magnetic
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 2

###

Samples:
US$ 38.5/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

CONSTRUCTION: BRUSH / BRUSHLESS
MOTOR OUTSIDE DIAMETER: 32mm / 42mm / 52mm / 62mm / 72mm / 82mm / 105 mm / 120mm
PLANETARY GEARBOX DIAMETER: 32mm / 42mm / 52mm / 62mm / 72mm / 82mm / 105 mm / 120mm
Conventional products:62mm motor match with 62mm gearbox.
Customized product: 62mm motor match with 52mm gearbox, 72mm motor match with 120mm gearbox (example)
VOLTAGE: 12 V / 24 V / 48 V
RATED POWER (watts): 10/ 15 / 20 / 25 / 40 / 60 / 90 / 120 / 150 / 180 / 200 / 300 ……750(MAX)
RATED SPEED(rpm): 450/540/750/1000/1500/2000/2500/3000 (can be customized)
PROTECTION GRADE: IP 20 / IP 44 / IP 55 / IP 65 (According to customer request)

GEAR RATIO:

 One Stage Two stage Three Stage
3.65/5.36/6.55/8.63 13.53/18.92/24.65/28.05/33.92/44.69/58.22 67.08……392.98
High speed Medium speed Low speed
Output Torque Range:0.16 N.m—300 N.m ( can be customized)
SHAFT: Diameter range:6 mm-32mm, key-way type / D-cut type / Bare type ( can be customized)
Accessories: Encoder/ Brake / Connector
US $38.5-63.9
/ Piece
| 		1 Piece

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Adjust Speed
Excitation Mode: Permanent Magnetic
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 2

###

Samples:
US$ 38.5/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

CONSTRUCTION: BRUSH / BRUSHLESS
MOTOR OUTSIDE DIAMETER: 32mm / 42mm / 52mm / 62mm / 72mm / 82mm / 105 mm / 120mm
PLANETARY GEARBOX DIAMETER: 32mm / 42mm / 52mm / 62mm / 72mm / 82mm / 105 mm / 120mm
Conventional products:62mm motor match with 62mm gearbox.
Customized product: 62mm motor match with 52mm gearbox, 72mm motor match with 120mm gearbox (example)
VOLTAGE: 12 V / 24 V / 48 V
RATED POWER (watts): 10/ 15 / 20 / 25 / 40 / 60 / 90 / 120 / 150 / 180 / 200 / 300 ……750(MAX)
RATED SPEED(rpm): 450/540/750/1000/1500/2000/2500/3000 (can be customized)
PROTECTION GRADE: IP 20 / IP 44 / IP 55 / IP 65 (According to customer request)

GEAR RATIO:

 One Stage Two stage Three Stage
3.65/5.36/6.55/8.63 13.53/18.92/24.65/28.05/33.92/44.69/58.22 67.08……392.98
High speed Medium speed Low speed
Output Torque Range:0.16 N.m—300 N.m ( can be customized)
SHAFT: Diameter range:6 mm-32mm, key-way type / D-cut type / Bare type ( can be customized)
Accessories: Encoder/ Brake / Connector

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Motor

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Motor

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Motor

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China Z52dpn2460-30s 24V 52mm 60W Planetary Gear DC Motor with Brush car motor China Z52dpn2460-30s 24V 52mm 60W Planetary Gear DC Motor with Brush car motor
editor by czh 2022-12-23

China Aokman RC Series IEC Flange-Mounted Small Gear Reducer Motor car motor

Merchandise Description

Product Description

AOKMAN RC Sequence IEC Flange-Mounted Modest Gear Reducer Motor

Components:
1. Housing:Aluminum Alloys
two. Gears:Hardened Helical Gears
3. Enter Configurations:Hollow Shaft with IEC Normalized Motor Flange  /Sound Shaft Enter
four. Relevant Motors:IEC-normalized Motors and Brake Motors/Explosion-proof Motors/Inverter Motors/Servo Motors
five. Output Configurations:Reliable Shaft with B5 Output Flange/Strong Shaft with B14 Output Flange

Types:
RC(Foot-mounted): RC01,RC02,RC03,RC04
RCF(B5 Flange-mounted): RCF01,RCF02,RCF03,RCF04
RCZ(B14 Flange-mounted): RCZ01,RCZ02,RCZ03,RCZ04

Attributes:
1. Modular design and style, dismountable frame foot, optional distinct body measurements and flanges
two. Aluminum housing, compact structures, light-weight excess weight
three. Carburizing and grinding hardened gears, durable and tough
four. Several mounting positions
5. Minimal sound

In depth Photographs

 

Item Parameters


Programs:Textile, Meals, Ceramics, Packaging, Logistics, Plastics Sector
Installation:Foot-mounted/B5 Flange-mounted/B14 Flange-mounted
Lubrication:Oil-tub and Splash Lubrication/Cooling:/All-natural Cooling

Frame Measurements Energy Ratio Max. Torque
01,02,03,04 .12kW~4kW three.66~fifty four 120N.m~500N.m

Packaging & Delivery

Firm Profile

Our Benefits

Our Solutions:

Pre-sale services one. Pick gear product.
two.Style and manufacture products according to clients’ particular necessity.
3.Practice specialized individual for consumers
Providers in the course of selling one.Pre-check out and take merchandise ahead of supply.
two. Support clients to draft fixing strategies.
Right after-sale services one.Support clientele to put together for the first design plan.
two. Teach the 1st-line operators.
3.Take initiative to get rid of the difficulty rapidly.
four. Supply specialized exchanging.

FAQ

1.Q:What varieties of gearbox can you generate for us?
A:Primary goods of our company: UDL sequence speed variator,RV sequence worm equipment reducer, ATA series shaft mounted gearbox, X,B collection gear reducer,
P collection planetary gearbox and R, S, K, and F series helical-tooth reducer, far more
than 1 hundred versions and countless numbers of technical specs
2.Q:Can you make as for each personalized drawing?
A: Indeed, we supply tailored support for clients.
three.Q:What is your phrases of payment ?
A: thirty% Advance payment by T/T right after signing the deal.70% prior to supply
four.Q:What is your MOQ?
A: 1 Set

If you have any demand for our products please come to feel totally free to speak to me. 

Application: Machinery
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

Frame Sizes Power Ratio Max. Torque
01,02,03,04 0.12kW~4kW 3.66~54 120N.m~500N.m

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.
Application: Machinery
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

Frame Sizes Power Ratio Max. Torque
01,02,03,04 0.12kW~4kW 3.66~54 120N.m~500N.m

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

How to Assemble a Planetary Motor

A Planetary Motor uses multiple planetary surfaces to produce torque and rotational speed. The planetary system allows for a wide range of gear reductions. Planetary systems are particularly effective in applications where higher torques and torque density are needed. As such, they are a popular choice for electric vehicles and other applications where high-speed mobility is required. Nevertheless, there are many benefits associated with using a planetary motor. Read on to learn more about these motors.

VPLite

If you’re looking to replace the original VP, the VPLite has a similar output shaft as the original. This means that you can mix and match your original gear sets, including the input and output shafts. You can even mix metal inputs with plastic outputs. Moreover, if you decide to replace the gearbox, you can easily disassemble the entire unit and replace it with a new one without losing any output torque.
Compared to a planetary motor, a spur gear motor uses fewer gears and is therefore cheaper to produce. However, the latter isn’t suitable for high-torque applications. The torque produced by a planetary gearmotor is evenly distributed, which makes it ideal for applications that require higher torque. However, you may have to compromise on the torque output if you’re looking for a lightweight option.
The VersaPlanetary Lite gearbox replaces the aluminum ring gear with a 30% glass-filled nylon gear. This gearbox is available in two sizes, which means you can mix and match parts to get a better gear ratio. The VPLite gearbox also has a female 5mm hex output shaft. You can mix and match different gearboxes and planetary gearboxes for maximum efficiency.
Motor

VersaPlanetary

The VersaPlanetary is a highly versatile planetary motor that can be mounted in a variety of ways. Its unique design includes a removable shaft coupler system that makes it simple to swap out the motor with another. This planetary motor mounts in any position where a CIM motor mounts. Here’s how to assemble the motor. First, remove the hex output shaft from the VersaPlanetary output stage. Its single ring clip holds it in place. You can use a drill press to drill a hole into the output shaft.
After mounting the gearbox, you can then mount the motor. The mounting hardware included with the VersaPlanetary Planetary Motor comes with four 10-32 threaded holes on a two-inch bolt circle. You can use these holes to mount your VersaPlanetary on a CIM motor or a CIM-compatible motor. Once assembled, the VersaPlanetary gearbox has 72 different gear ratios.
The VersaPlanetary gearbox is interchangeable with regular planetary gearboxes. However, it does require additional parts. You can purchase a gearbox without the motor but you’ll need a pinion. The pinion attaches to the shaft of the motor. The gearbox is very sturdy and durable, so you won’t have to worry about it breaking or wearing out.

Self-centering planetary gears

A planetary motor is a simple mechanical device that rotates around a axis, with the planets moving around the shaft in a radial direction. The planets are positioned so that they mesh with both the sun gear and the output gears. The carrier 48 is flexibly connected to the drive shaft and can move depending on the forces exerted by the planet gears. In this way, the planets can always be in the optimal mesh with the output gears and sun gear.
The first step in developing a planetary gear motor is to identify the number of teeth in each planet. The number of teeth should be an integer. The tooth diameters of the planets should mesh with each other and the ring. Typically, the teeth of one planet must mesh with each other, but the spacing between them must be equal or greater than the other. This can be achieved by considering the tooth count of each planet, as well as the spacing between planets.
A second step is to align the planet gears with the output gears. In a planetary motor, self-centering planetary gears must be aligned with both input and output gears to provide maximum torque. For this to be possible, the planet gears must be connected with the output shaft and the input shaft. Similarly, the output shaft should also be able to align with the input gear.
Motor

Encoders

A planetary geared motor is a DC motor with a planetary gearbox. The motor can be used to drive heavy loads and has a ratio of 104:1. The shaft speed is 116rpm when it is unloaded. A planetary gearbox has a low backlash and is often used in applications that need high torque. Planetary Motor encoders can help you keep track of your robot’s position or speed.
They are also able to control motor position and speed with precision. Most of them feature high resolution. A 0.18-degree resolution encoder will give you a minimum of 2000 transitions per rotation between outputs A and B. The encoder is built to industrial standards and has a sturdy gearbox to avoid damage. The encoder’s robust design means it will not stall when the motor reaches its maximum speed.
There are many advantages to a planetary motor encoder. A high-quality one will not lose its position or speed even if it’s subject to shocks. A good quality planetary motor will also last a long time. Planetary motors are great for resale or for your own project. If you’re considering buying a planetary motor, consider this information. It’ll help you decide if a particular model is right for your needs.

Cost

There are several advantages of planetary motors. One of the biggest is their cost, but they can also be used in many different applications. They can be combined with a variety of gearboxes, and are ideal for various types of robots, laboratory automation, and production applications. Planetary gearboxes are available in many different materials, and plastic planetary gearboxes are an economical alternative. Plastic gearboxes reduce noise at higher speeds, and steel input stage gears are available for high torques. A modified lubrication system can help with difficult operating conditions.
In addition to being more durable, planetary motors are much more efficient. They use fewer gears, which lowers the overall cost of production. Depending on the application, a planetary motor can be used to move a heavy object, but is generally less expensive than its counterpart. It is a better choice for situations where the load is relatively low and the motor is not used frequently. If you need a very high torque output, a planetary motor may be the better option.
Planetary gear units are a good choice for applications requiring high precision, high dynamics, and high torque density. They can be designed and built using TwinCAT and TC Motion Designer, and are delivered as complete motor and gear unit assemblies. In a few simple steps, you can calculate the torque required and compare the costs of different planetary gear units. You can then choose the best model for your application. And because planetary gear units are so efficient, they are a great option for high-end industrial applications.
Motor

Applications

There are several different applications of the planetary motor. One such application is in motion control. Planetary gearboxes have many benefits, including high torque, low backlash, and torsional stiffness. They also have an extremely compact design, and can be used for a variety of applications, from rack and pinion drives to delta robotics. In many cases, they are less expensive to manufacture and use than other types of motors.
Another application for planetary gear units is in rotary tables. These machines require high precision and low backlash for their precise positioning. Planetary gears are also necessary for noise reduction, which is a common feature in rotary tables. High precision planetary gears can make the height adjustment of OP tables a breeze. And because they are extremely durable and require low noise, they are a great choice for this application. In this case, the planetary gear is matched with an AM8000 series servomotor, which gives a wide range of choices.
The planetary gear transmission is also widely used in helicopters, automobiles, and marine applications. It is more advanced than a countershaft drive, and is capable of higher torque to weight ratios. Other advantages include its compact design and reduced noise. A key concern in the development of this type of transmission is to minimize vibration. If the output of a planetary gear transmission system is loud, the vibration caused by this type of drive system may be too loud for comfort.

China Aokman RC Series IEC Flange-Mounted Small Gear Reducer Motor car motor China Aokman RC Series IEC Flange-Mounted Small Gear Reducer Motor car motor
editor by czh 2022-12-15

China Kawasaki M5X130 Zax200 Zax240-3 Swing Motor car motor

Product Description

M5X130 ZAX200  ZAX240-3  swing motor

original manufacturers’ names, part numbers and description are for reference purposes only and it does not imply that any part listed is the product of these manufacturers.

 

US $890
/ Piece
| 		2 Pieces

(Min. Order)

###

Excitation Mode: Excited
Power Rating: 3500W
Casing Protection: Open Type
Number of Poles: 10
Speed: Low Speed
Type: Plunger Type

###

Samples:
US$ 890/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

 
US $890
/ Piece
| 		2 Pieces

(Min. Order)

###

Excitation Mode: Excited
Power Rating: 3500W
Casing Protection: Open Type
Number of Poles: 10
Speed: Low Speed
Type: Plunger Type

###

Samples:
US$ 890/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

 

Benefits of a Planetary Motor

If you’re looking for an affordable way to power a machine, consider purchasing a Planetary Motor. These units are designed to provide a massive range of gear reductions, and are capable of generating much higher torques and torque density than other types of drive systems. This article will explain why you should consider purchasing one for your needs. And we’ll also discuss the differences between a planetary and spur gear system, as well as how you can benefit from them.

planetary gears

Planetary gears in a motor are used to reduce the speed of rotation of the armature 8. The reduction ratio is determined by the structure of the planetary gear device. The output shaft 5 rotates through the device with the assistance of the ring gear 4. The ring gear 4 engages with the pinion 3 once the shaft is rotated to the engagement position. The transmission of rotational torque from the ring gear to the armature causes the motor to start.
The axial end surface of a planetary gear device has two circular grooves 21. The depressed portion is used to retain lubricant. This lubricant prevents foreign particles from entering the planetary gear space. This feature enables the planetary gear device to be compact and lightweight. The cylindrical portion also minimizes the mass inertia. In this way, the planetary gear device can be a good choice for a motor with limited space.
Because of their compact footprint, planetary gears are great for reducing heat. In addition, this design allows them to be cooled. If you need high speeds and sustained performance, you may want to consider using lubricants. The lubricants present a cooling effect and reduce noise and vibration. If you want to maximize the efficiency of your motor, invest in a planetary gear hub drivetrain.
The planetary gear head has an internal sun gear that drives the multiple outer gears. These gears mesh together with the outer ring that is fixed to the motor housing. In industrial applications, planetary gears are used with an increasing number of teeth. This distribution of power ensures higher efficiency and transmittable torque. There are many advantages of using a planetary gear motor. These advantages include:
Motor

planetary gearboxes

A planetary gearbox is a type of drivetrain in which the input and output shafts are connected with a planetary structure. A planetary gearset can have three main components: an input gear, a planetary output gear, and a stationary position. Different gears can be used to change the transmission ratios. The planetary structure arrangement gives the planetary gearset high rigidity and minimizes backlash. This high rigidity is crucial for quick start-stop cycles and rotational direction.
Planetary gears need to be lubricated regularly to prevent wear and tear. In addition, transmissions must be serviced regularly, which can include fluid changes. The gears in a planetary gearbox will wear out with time, and any problems should be repaired immediately. However, if the gears are damaged, or if they are faulty, a planetary gearbox manufacturer will repair it for free.
A planetary gearbox is typically a 2-speed design, but professional manufacturers can provide triple and single-speed sets. Planetary gearboxes are also compatible with hydraulic, electromagnetic, and dynamic braking systems. The first step to designing a planetary gearbox is defining your application and the desired outcome. Famous constructors use a consultative modeling approach, starting each project by studying machine torque and operating conditions.
As the planetary gearbox is a compact design, space is limited. Therefore, bearings need to be selected carefully. The compact needle roller bearings are the most common option, but they cannot tolerate large axial forces. Those that can handle high axial forces, such as worm gears, should opt for tapered roller bearings. So, what are the advantages and disadvantages of a helical gearbox?

planetary gear motors

When we think of planetary gear motors, we tend to think of large and powerful machines, but in fact, there are many smaller, more inexpensive versions of the same machine. These motors are often made of plastic, and can be as small as six millimeters in diameter. Unlike their larger counterparts, they have only one gear in the transmission, and are made with a small diameter and small number of teeth.
They are similar to the solar system, with the planets rotating around a sun gear. The planet pinions mesh with the ring gear inside the sun gear. All of these gears are connected by a planetary carrier, which is the output shaft of the gearbox. The ring gear and planetary carrier assembly are attached to each other through a series of joints. When power is applied to any of these members, the entire assembly will rotate.
Compared to other configurations, planetary gearmotors are more complicated. Their construction consists of a sun gear centered in the center and several smaller gears that mesh with the central sun gear. These gears are enclosed in a larger internal tooth gear. This design allows them to handle larger loads than conventional gear motors, as the load is distributed among several gears. This type of motor is typically more expensive than other configurations, but can withstand the higher-load requirements of some machines.
Because they are cylindrical in shape, planetary gear motors are incredibly versatile. They can be used in various applications, including automatic transmissions. They are also used in applications where high-precision and speed are necessary. Furthermore, the planetary gear motor is robust and is characterized by low vibrations. The advantages of using a planetary gear motor are vast and include:
Motor

planetary gears vs spur gears

A planetary motor uses multiple teeth to share the load of rotating parts. This gives planetary gears high stiffness and low backlash – often as low as one or two arc minutes. These characteristics are important for applications that undergo frequent start-stop cycles or rotational direction changes. This article discusses the benefits of planetary gears and how they differ from spur gears. You can watch the animation below for a clearer understanding of how they operate and how they differ from spur gears.
Planetary gears move in a periodic manner, with a relatively small meshing frequency. As the meshing frequency increases, the amplitude of the frequency also increases. The amplitude of this frequency is small at low clearance values, and increases dramatically at higher clearance levels. The amplitude of the frequency is higher when the clearance reaches 0.2-0.6. The amplitude increases rapidly, whereas wear increases slowly after the initial 0.2-0.6-inch-wide clearance.
In high-speed, high-torque applications, a planetary motor is more effective. It has multiple contact points for greater torque and higher speed. If you are not sure which type to choose, you can consult with an expert and design a custom gear. If you are unsure of what type of motor you need, contact Twirl Motor and ask for help choosing the right one for your application.
A planetary gear arrangement offers a number of advantages over traditional fixed-axis gear system designs. The compact size allows for lower loss of effectiveness, and the more planets in the gear system enhances the torque density and capacity. Another benefit of a planetary gear system is that it is much stronger and more durable than its spur-gear counterpart. Combined with its many advantages, a planetary gear arrangement offers a superior solution to your shifting needs.
Motor

planetary gearboxes as a compact alternative to pinion-and-gear reducers

While traditional pinion-and-gear reducer design is bulky and complex, planetary gearboxes are compact and flexible. They are suitable for many applications, especially where space and weight are issues, as well as torque and speed reduction. However, understanding their mechanism and working isn’t as simple as it sounds, so here are some of the key benefits of planetary gearing.
Planetary gearboxes work by using two planetary gears that rotate around their own axes. The sun gear is used as the input, while the planetary gears are connected via a casing. The ratio of these gears is -Ns/Np, with 24 teeth in the sun gear and -3/2 on the planet gear.
Unlike traditional pinion-and-gear reducer designs, planetary gearboxes are much smaller and less expensive. A planetary gearbox is about 50% smaller and weighs less than a pinion-and-gear reducer. The smaller gear floats on top of three large gears, minimizing the effects of vibration and ensuring consistent transmission over time.
Planetary gearboxes are a good alternative to pinion-and-gear drive systems because they are smaller, less complex and offer a higher reduction ratio. Their meshing arrangement is similar to the Milky Way, with the sun gear in the middle and two or more outer gears. They are connected by a carrier that sets their spacing and incorporates an output shaft.
Compared to pinion-and-gear reduces, planetary gearboxes offer higher speed reduction and torque capacity. As a result, planetary gearboxes are small and compact and are often preferred for space-constrained applications. But what about the high torque transfer? If you’re looking for a compact alt

China Kawasaki M5X130 Zax200 Zax240-3 Swing Motor car motor China Kawasaki M5X130 Zax200 Zax240-3 Swing Motor car motor
editor by czh 2022-11-28

China YL Motor 2800RPM Single-Phase Two-Value Capacitor 2.2KW 3HPAC Induction Electrical Motor YL90L-2 car motor

Warranty: 1 year
Model Number: YL90L-2
Type: Asynchronous Motor
Frequency: 50/60Hz
Phase: Single-phase
Protect Feature: Drip-proof
AC Voltage: 220V or Order
Efficiency: IE 1, IE 2,IE 3
Rated Speed: 2800 r/min
Application: Machines
Package: Carton
Wire: 100% Copper
Protection class: IP44
Insulation class: F/B
Duty: S1
Certification: CCC, ce
Packaging Details: carton
Port: HangZhou

Specification

Warranty1 year
Place of OriginChina
ZHangZhoug
Brand Name Kingnew
Model Number YL90L-2
TypeAsynchronous Motor
Frequency50/60Hz
PhaseSingle-phase
CertificationCCC, ce
Protect FeatureDrip-proof
AC Voltage220V or Order
EfficiencyIE 1, IE 2,IE 3
Rated Speed2800 r/min
ApplicationMachines
PackageCarton
Wire100% Copper
Protection classIP44
Insulation classF/B
DutyS1
Packing & Delivery Company Profile HangZhou QIANNIU MECHANICAL AND ELECTRICAL CO.,LTD is a professional company which is specialized in deep well pumps, submersible pumps, clean water pumps and electric motors. We not only have advanced production equipment and test equipment, but also have excellent engineers and managers. With the brands “Walle” and “PUJA SI”, our products have good markets both at home and abroad. Our customers can be found in Europe, Southeast Asia, Africa and the Middle East. Our company has been carrying out the brand strategy from our foundation because we believe that only brand can cast brilliance. The design of CZPT means is of the first class quality. We always uphold our policy and insist on technological innovation to establish the first-class brand. We are full-hearted to serve our customers.All of our pumps have obtained CE and IEI certifications as well as ISO9001 international quality system certificate. We welcome more and more new or old customers to visit our company to negotiate business with us! FAQ 1. who are we?We are based in ZHangZhoug, China, start from 2571,sell to South Asia(30.00%),Mid East(30.00%),Southeast Asia(20.00%),Eastern Europe(10.00%),South America(10.00%). There are total about 5-10 people in our office.2. how can we guarantee quality?Always a pre-production sample before mass production;Always final Inspection before shipment;3.what can you buy from us?ELECTRIC MOTOR,WATER PUMP,WASHER,ALTERNATOR,ACCESSORIES4. why should you buy from us not from other suppliers?HangZhou QIANNIU MECHANICAL AND ELECTRICAL CO.,LTD is a professional company which is specialized in deep well pumps, submersible pumps, clean water pumps and electric motors.5. what services can we provide?Accepted Delivery Terms: FOB,CIF,EXW,CIP；Accepted Payment Currency:USD,EUR,CNY;Accepted Payment Type: T/T,L/C;Language Spoken:English,Chinese,Spanish,Arabic

The Benefits of Using a Gear Motor

A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.

Electric motor

The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Motor

Gear reducer

A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor

Motor shaft

Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
Motor

First stage gears

The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.

China YL Motor 2800RPM Single-Phase Two-Value Capacitor 2.2KW 3HPAC Induction Electrical Motor YL90L-2 car motor China YL Motor 2800RPM Single-Phase Two-Value Capacitor 2.2KW 3HPAC Induction Electrical Motor YL90L-2 car motor
editor by czh

China IEC 5HP 3 phases synchronous PMSM brushless DC motor China car motor

Warranty: 3months-1year
Model Number: VOL-IEC112S3750-4P-06
Type: Asynchronous Motor
Frequency: 60HZ
Phase: Three-phase
Protect Feature: Drip-proof
AC Voltage: 208-230 / 240 V
Efficiency: 90%
Housing: Aluminum Frame
Speed Range: 1500rpm
Material: Permanent Magnets
Controller: Customized, Optional
Braker: Optional
Insulation Class: Class F
Enclosure: IP54
Frame Size: 112S
Wire: 100% copper
Duty: S1 (continuous)
Certification: CCC, ce, RoHS
Packaging Details: Packing: Standard sea or air package will be perfectly protected in the delivery.
Port: FOB HangZhou

Product Display

Motor type Output Power Voltage Load Speed Rated Torque Efficiency Noise IP Class
KW V A RPM Nm % dB
VOL-BL2K5A48 2.5 48 56.00 1500 15.92 92 62 IP 54
VOL-BL2K5A72 2.5 72 37.34 1500 15.92 92 62 IP 54
VOL-BL2K5A110 2.5 110 ac 14.11 1500 15.92 92 62 IP 54
VOL-BL2K5A220 2.5 220 ac 7.05 1500 15.92 92 62 IP 54
VOL-BL2K5A380 2.5 380 ac 4.08 1500 15.92 92 62 IP 54

VIEW MORE PLS CONTACT US >>>

Other Products
Process Flow
About Us
Packing&Transport
Q:Motor has been running then fails to start,what to do?A:Likely cause: Fuse or circuit breaker is tripped.
What to do: Replace the fuse or reset the breaker.

Likely cause: Armature is shorted. Motor may make a humming noise and the circuit breaker or fuse will trip. What to do: Disassemble motor and inspect the armature for a burnt coil. Inspect the commutator for burnt bars. If this condition exists, the motor needs to be replaced.

Likely cause: The brushes may be worn down too far and no longer make contact with the commutator. What to do: Check the brushes to make sure that they are still making contact with the commutator. Contact manufacturer for brushes.

Likely cause: Controller may be defective. What to do: Verify voltage is coming out of the controller.

Q: On initial installation, motor fails to start up,what to do?A: Likely cause: Motor is incorrectly wired What to do: Verify that the motor is wired correctly.

Likely cause: No output power from controller. What to do: Measure voltage coming from the controller.

Likely cause: Motor is damaged and the armature is rubbing against the magnets. What to do: Disassemble motor and see if the armature can be realigned by reassembly. Motor may have to be replaced.

Q: Motor takes too long to accelerate,what to do?A: Likely cause: Motor controller not properly set. What to do: Adjust the acceleration trim pot of the controller.

Likely cause: Brushes are worn. What to do: Verify brush length.

Likely cause: Bearings may be defective. What to do: Inspect bearings. Noisy or rough bearings should be replaced.

Q: Motor runs in the wrong direction,what to do?A: Likely cause: Incorrect wiring What to do: Interchange the 2 motor leads.

Q: Motor runs OK but has a clicking noise,what to do?A: Likely cause: Suspect a burr on the commutator. What to do: Remove burr from commutator using a commutator stone.

How to Select a Gear Motor

A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

Angular geared motors

Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.
Motor

Planetary gearboxes

Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Motor

Hydraulic gear motors

Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Motor

Croise motors

There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

China IEC 5HP 3 phases synchronous PMSM brushless DC motor China car motor China IEC 5HP 3 phases synchronous PMSM brushless DC motor China car motor
editor by czh

China OEM 1630 12V coreless planetary gearreductiondecelerationgearbox motor dc motor with brushed for tattoo machine car motor

Warranty: 3months-1year
Product Variety: 1630
Usage: BOAT, Vehicle, Electric powered Bicycle, Fan, Residence Equipment, Beauty instrument, Wise Property, Tattoo motor
Variety: Brush Motor
Torque: a hundred-700mN.M
Construction: Everlasting Magnet
Commutation: Brush
Shield Characteristic: Drip-proof
Velocity(RPM): 10000rpm
Ongoing Current(A): 1-2A
Efficiency: IE two
DC MOTOR: coreless
Product Identify: equipment motor
Key phrases: coreless motor
Motor variety: brush motor and brushless motor
type: dc motor
Certification: ce
Software: eye massager
Packaging Specifics: Every merchandise is packed in a self-sealing bag, then packed into a sponge lattice, and then packed into cartons.

FAQQ1: Are you trading firm or producer ? A: We are the producer with 5 years’ encounters. Q2: What’s your primary products ? A: Coreless motor, Agricultural tiny tractor new PTO rotavator for sale gear motor, brushless motor, brushed motor.Q3: What is the main usage of your goods ?A: Ourproducts are commonly utilised in aviation,equipment,health care,robotics,automation, Security doors,DMS,and tattoo device,eyebrow tattoo machine/pen, k97 1-fourteen inch shaft helical bevel gearmotor 1 twenty ratio electric powered motor with reduction gear facial massager,adult item and other fields. This autumn: Do you take OEM/ODM ? A: We could accept ODM. Our R&D team have 6 knowledgeable engineers. Tell us your needs, we can make it.Q5: What I need to give if I want to make a personalized get ? A: Please kindly notify us the voltages,speed,torque and overall dimension. Q6: What if I really don’t know the earlier mentioned data ? A: You should inform us the use of the merchandise you want, we will give you expert advice. Q7: How about the sample get ? A: Samples are offered. The further fees owing to the model sort. Q8: What is the payment time period ? A: Payment by T/T or L/C. Sample buy must be a hundred% pay as you go. For bulk get, 50% deposit, the balance paid out before transport.Q9: Which shipping way is accessible ? A: Sample or little buy by DHL,UPS, Mixer Gearbox Pto Shaft tractor extensive angle joint FedEx. Bulk order by Air or by Sea. Q10: How lengthy is the shipping and delivery time ? A: Sample get will take 7-fifteen workdays. Bulk purchase requires twenty five-thirty workdays.

How to Assemble a Planetary Motor

A Planetary Motor uses multiple planetary surfaces to produce torque and rotational speed. The planetary system allows for a wide range of gear reductions. Planetary systems are particularly effective in applications where higher torques and torque density are needed. As such, they are a popular choice for electric vehicles and other applications where high-speed mobility is required. Nevertheless, there are many benefits associated with using a planetary motor. Read on to learn more about these motors.

VPLite

If you’re looking to replace the original VP, the VPLite has a similar output shaft as the original. This means that you can mix and match your original gear sets, including the input and output shafts. You can even mix metal inputs with plastic outputs. Moreover, if you decide to replace the gearbox, you can easily disassemble the entire unit and replace it with a new one without losing any output torque.
Compared to a planetary motor, a spur gear motor uses fewer gears and is therefore cheaper to produce. However, the latter isn’t suitable for high-torque applications. The torque produced by a planetary gearmotor is evenly distributed, which makes it ideal for applications that require higher torque. However, you may have to compromise on the torque output if you’re looking for a lightweight option.
The VersaPlanetary Lite gearbox replaces the aluminum ring gear with a 30% glass-filled nylon gear. This gearbox is available in two sizes, which means you can mix and match parts to get a better gear ratio. The VPLite gearbox also has a female 5mm hex output shaft. You can mix and match different gearboxes and planetary gearboxes for maximum efficiency.
Motor

VersaPlanetary

The VersaPlanetary is a highly versatile planetary motor that can be mounted in a variety of ways. Its unique design includes a removable shaft coupler system that makes it simple to swap out the motor with another. This planetary motor mounts in any position where a CIM motor mounts. Here’s how to assemble the motor. First, remove the hex output shaft from the VersaPlanetary output stage. Its single ring clip holds it in place. You can use a drill press to drill a hole into the output shaft.
After mounting the gearbox, you can then mount the motor. The mounting hardware included with the VersaPlanetary Planetary Motor comes with four 10-32 threaded holes on a two-inch bolt circle. You can use these holes to mount your VersaPlanetary on a CIM motor or a CIM-compatible motor. Once assembled, the VersaPlanetary gearbox has 72 different gear ratios.
The VersaPlanetary gearbox is interchangeable with regular planetary gearboxes. However, it does require additional parts. You can purchase a gearbox without the motor but you’ll need a pinion. The pinion attaches to the shaft of the motor. The gearbox is very sturdy and durable, so you won’t have to worry about it breaking or wearing out.

Self-centering planetary gears

A planetary motor is a simple mechanical device that rotates around a axis, with the planets moving around the shaft in a radial direction. The planets are positioned so that they mesh with both the sun gear and the output gears. The carrier 48 is flexibly connected to the drive shaft and can move depending on the forces exerted by the planet gears. In this way, the planets can always be in the optimal mesh with the output gears and sun gear.
The first step in developing a planetary gear motor is to identify the number of teeth in each planet. The number of teeth should be an integer. The tooth diameters of the planets should mesh with each other and the ring. Typically, the teeth of one planet must mesh with each other, but the spacing between them must be equal or greater than the other. This can be achieved by considering the tooth count of each planet, as well as the spacing between planets.
A second step is to align the planet gears with the output gears. In a planetary motor, self-centering planetary gears must be aligned with both input and output gears to provide maximum torque. For this to be possible, the planet gears must be connected with the output shaft and the input shaft. Similarly, the output shaft should also be able to align with the input gear.
Motor

Encoders

A planetary geared motor is a DC motor with a planetary gearbox. The motor can be used to drive heavy loads and has a ratio of 104:1. The shaft speed is 116rpm when it is unloaded. A planetary gearbox has a low backlash and is often used in applications that need high torque. Planetary Motor encoders can help you keep track of your robot’s position or speed.
They are also able to control motor position and speed with precision. Most of them feature high resolution. A 0.18-degree resolution encoder will give you a minimum of 2000 transitions per rotation between outputs A and B. The encoder is built to industrial standards and has a sturdy gearbox to avoid damage. The encoder’s robust design means it will not stall when the motor reaches its maximum speed.
There are many advantages to a planetary motor encoder. A high-quality one will not lose its position or speed even if it’s subject to shocks. A good quality planetary motor will also last a long time. Planetary motors are great for resale or for your own project. If you’re considering buying a planetary motor, consider this information. It’ll help you decide if a particular model is right for your needs.

Cost

There are several advantages of planetary motors. One of the biggest is their cost, but they can also be used in many different applications. They can be combined with a variety of gearboxes, and are ideal for various types of robots, laboratory automation, and production applications. Planetary gearboxes are available in many different materials, and plastic planetary gearboxes are an economical alternative. Plastic gearboxes reduce noise at higher speeds, and steel input stage gears are available for high torques. A modified lubrication system can help with difficult operating conditions.
In addition to being more durable, planetary motors are much more efficient. They use fewer gears, which lowers the overall cost of production. Depending on the application, a planetary motor can be used to move a heavy object, but is generally less expensive than its counterpart. It is a better choice for situations where the load is relatively low and the motor is not used frequently. If you need a very high torque output, a planetary motor may be the better option.
Planetary gear units are a good choice for applications requiring high precision, high dynamics, and high torque density. They can be designed and built using TwinCAT and TC Motion Designer, and are delivered as complete motor and gear unit assemblies. In a few simple steps, you can calculate the torque required and compare the costs of different planetary gear units. You can then choose the best model for your application. And because planetary gear units are so efficient, they are a great option for high-end industrial applications.
Motor

Applications

There are several different applications of the planetary motor. One such application is in motion control. Planetary gearboxes have many benefits, including high torque, low backlash, and torsional stiffness. They also have an extremely compact design, and can be used for a variety of applications, from rack and pinion drives to delta robotics. In many cases, they are less expensive to manufacture and use than other types of motors.
Another application for planetary gear units is in rotary tables. These machines require high precision and low backlash for their precise positioning. Planetary gears are also necessary for noise reduction, which is a common feature in rotary tables. High precision planetary gears can make the height adjustment of OP tables a breeze. And because they are extremely durable and require low noise, they are a great choice for this application. In this case, the planetary gear is matched with an AM8000 series servomotor, which gives a wide range of choices.
The planetary gear transmission is also widely used in helicopters, automobiles, and marine applications. It is more advanced than a countershaft drive, and is capable of higher torque to weight ratios. Other advantages include its compact design and reduced noise. A key concern in the development of this type of transmission is to minimize vibration. If the output of a planetary gear transmission system is loud, the vibration caused by this type of drive system may be too loud for comfort.

China OEM 1630 12V coreless planetary gearreductiondecelerationgearbox motor dc motor with brushed for tattoo machine car motor

Original Factory Automotive 4G LTE Motor Vehi sales cle Mini Car GP Custom S Tracker

Product Description

Original Factory CZPT motive 4G LTE CZPT Vehicle Mini Car GPS Tracker 
 

The M558T is a 4G GPS tracker for vehicles. It works with 4G sim card. The M588T is built-in GPS module and 4G module so that it locates car real time. The M588T is small and easy to install, it can be used for all vehicles. It can be working in those countries that have 4G network, M558F is the best option.

Functions:

1) Support LTE/GSM
2) Wide for voltage input range: 9-90VDC
3) GPS continuous positioning 
4) ACC detection
5) Cut off engine remotely
6) Get location via SMS & web platform & APP.
7) Built-in G-sensor, theft-proof
8) Setting three phone numbers for alarm alert  
9) Trigger CZPT off alarm when the CZPT supply is disconnected intentionally (with backup battery)
10) Support GEO-Fence alarm, over speed alarm, harsh acceleration/braking/cornering alarm 
 

Specifications:
 

Items Parameters
work voltage 7VDC-90VDC
work current 30mA-55mA
GSM module EC200SCNAA
Support LTE/GSM Frequency LTE-FDD: B1/B3/B5/B8
LTE-TDD: B34/B38/B39/B40/B41
GSM: 900/1800MHz
GPS module Built-in
Channels 56 channels examine track
Position accuracy 2 meters
Work temperature -20~70ºC
Terminal size 86mm*37mm*15mm
Operating Temperature -20ºC-65ºC
Humidity 5%-95%
weight 40g
Internal CZPT ery 50mAh/4.2V

Web Platform & APP:

Our company has CZPT own web platform and mobile application. The web platform is hosted by cloud cluster server, which is consist of many servers. The advantages are:
1. The platform can host unlimited quantity of gps tracking device.
2. The server never goes down, because it has backup server.
3. The platform responses CZPT .
4. The platform supports CZPT ized reports and functions.

Company Profile:

Rope Innovation Co., Ltd. is a direct manufacturer with more than 10 years of experience in the GPS tracking industry. Its
headquarter locates in HangZhou, CZPT ‘s most innovative city. Rope Innovation is a true innovator of high-quality GPS tracker devices and has satisfied the needs of CZPT ers from 120 countries around the world.

 

Within 10 years development, we had built up a large manufacturing base including molding, plastics shaping, CZPT and full sets of production lines. In order to improve the quality and safety of products and meet the requirements of CZPT CZPT ers, we have obtained certificates such as ISO9001-2008, CCC, CE, FCC, RoHS and explosion-proof certificates.

 

Certificates
Rope Innovation is the verified supplier by Alibaba and TUV. It is well guaranteed to work with us. And CZPT products are passed certificates of CE, ROHS and FCC.

100% QC Before Delivery and Excellent CZPT er Feedback:

FAQ:
Q: Are you manufacturer?
A: Yes, we are the manufacturer of gps tracker for more than 10 years.

Q: Do you provide platform and mobile APP?
A: Yes, we provide both. And CZPT platform is deployed in cluster cloud server, it works safe, CZPT and stable.

Q: Do you provide both Android and iOS APP?
A: Yes, we provide both.

Q: What’s the warranty?
A: We provide one year warranty to all CZPT products.

Q: Do you have certificates?
A: Yes, CZPT factory passed ISO9001 and CZPT products passed CE, ROHS, FCC.

Q: What’s the minimum order quantity?
A: 1 pc.

Q: What’s the payment methods?
A: T/T bank, Paypal, CZPT ern Uinon, Credit Card.

OEM Al shop uminum Alloy Motor Auto Spare Parts Custom Die C wholesaler asting Car Parts

Product Description

 

Company name HangZhou Fusehngda CZPT Co., ltd (FSD)
Product Aluminum casting molds, CZPT Die CZPT Parts
Certification ISO9001
Equipment 5 Cold-chamber Die CZPT machines & Mold machines, 1 set 280T, 1 set 300T, 2 set 400T, 1 set 650T;
3 sets Grinding machines, 3 sets Horizontal Belt CZPT s, 1 set shot blasting machine;
Molds machines: 2 CNC, 1NC Lathing machine, 1 WEDM, 1 EDM, 1 CZPT Miller,1 Radial Drill,1Flat Grinder
Technical Die CZPT Molds production, CZPT Pressure Die CZPT , Low Pressure Die CZPT parts production.
Material: ADC12, A380, 102, 104
Surface treatment Sand blasting, Oxidation, Painting, Powder Coating, CZPT ctrophoresis
Packaging Steel Case, Plywood case, carton box + pallet.
Shipment 30-45 days for mold production. 30 days for parts.

HangZhou CZPT da CZPT Co.,ltd locates in Xihu (West CZPT ) Dis. District, HangZhou city, occupies 5000 sq.metres, is one of the early enterprises engaged in aluminum die casting oxidation production since year 2571; Since the establishment of the factory, relying on the technical support of major universities and industry elites, has formed a set of aluminum ingot research and development, production, die casting, processing, oxidation in one of the comprehensive enterprise.

The company is based on high pressure die casting mold manufacturing, high / low pressure casting parts ADC12, A380, 102, 104, supplemented by die casting oxidation, to ensure the development of each product material performance, die casting performance, can reach the ideal state; Combined with the market demand, we have developed CZPT kinds of special die casting aluminum, high temperature resistant aluminum, high thermal conductivity aluminum, high strength aluminum and other special die casting aluminum; And to provide CZPT ers with mold, die casting, processing, anodic oxidation and other comprehensive process support, sandblasting, machining, oxidation and so on, to ensure the smooth expansion of materials in household appliances, auto fittings, fishing gear, locks, high-speed rail, electronics, lamps and lanterns and other fields.

HangZhou CZPT da CZPT Co.,ltd (FSD) has been in CZPT Die CZPT molds & Parts manufacture since year 2571.

Equipped with 5 Cold-chamber Die CZPT machines & Mold machines, 1 set 280T, 1 set 300T, 2 set 400T, 1 set 650T;
3 sets Grinding machines, 3 sets Horizontal Belt CZPT s, 1 set shot blasting machine;
Molds machines: 2 CNC, 1NC Lathing machine, 1 WEDM, 1 EDM, 1 CZPT Miller,1 Radial Drill,1Flat Grinder.

1. Are you a manufacturer or a trading company?

We are a professional manufacturer with more than years of experience in designing and producing multi-die castings for export.
 
2. How can I get some samples?
If you need it, we are happy to provide you with free samples, but new CZPT ers need to pay for express delivery costs, which will be deducted from the payment of the formal order.
 
3. Can you make castings according to CZPT drawings?
Yes, we can cast according to your drawings, 2D drawings or 3D cad models. If a 3D cad model can be provided, the mold development efficiency will be higher. But without 3D, based on 2D drawing, we can still get the samples properly approved.
 
4. Can you make castings based on CZPT samples?
Yes, we can make measurements based on your samples to make mold making drawings.
 
5. What is your internal quality control equipment?
We have in-house spectrometers to monitor chemical properties, tensile testing machines to control mechanical properties, and UT Sonic as an NDT inspection method to control the inspection of castings under the surface of the castings.

Welcome inquiry for CZPT products !
 

Environment Protection Waste Engine Oil Refining Plant Used Black Waste Car Motor sales Oil to Base Oi shop l Refinery

Product Description

environment protection Waste Engine Oil refining plant used black waste car motor oil to base oil refinery

1.Waste engine oil waste car motor oil refinery to base oil ?
The main technology of waste oil regeneration in abroad is Kleen,Meinken,IFP,KTI,Snamprogetti,DOH,DCH,BERC and Recyclon.etc.New processes that have been applied abroad include ultrafiltration, centrifugal separation, molecular distillation, flocculation, solvent refining, etc.In the late 1980s, two regeneration processes were developed in CZPT .One is distillation-extraction-clay process, which uses ethanol as solvent for extraction; the other is high temperature clay process, which combines distillation and clay treatment in the same process.Recent thin film evaporator – furfural refining-clay process can extract more base oil fractions than conventional vacuum distillation, furfural has better extraction effect than ethanol, and the yield of base oil is higher.
According to the deterioration mechanism and degree of lubricating oil, the regeneration technology of waste engine oil can be divided into re-purification process, fine refining process and re-refining process.

2.Technology of CZPT company

 1) Process flow description

The process of waste oil reduction and regeneration base oil is introduced as follows: Our company specializes in the production of waste oil regeneration equipment and process research and development for more than ten years, and constantly explores and improves the technology. Combining with the advantages and disadvantages of the current equipment process, we focus on the materials in the process of waste oil processing equipment, which are easy to coke at high temperature, have high operating cost and have many potential safety hazards. The problem of high overhaul rate and high technical difficulty has been discussed and studied, and a lot of manpower and material resources have been invested. Through repeated testing and continuous improvement, the problem of easy coking of materials at high temperature has been successfully solved.

 2) Production process flowchart

3)Project overview(Examples for reference)

1)Project Name: 18,000T/a waste lubricant recycling project;

2) Nature of the industry: waste resources and recycling of waste materials;

 3) Total investment: 20 million yuan

4) CZPT area: 14,000 square meters, construction area 5,120 square meters;

5) CZPT ing area: The whole plant has a CZPT area of 1820 square meters, and the CZPT ing rate is 13%;

6) Number of employees: 30 staff members;

7) Hours of work: 300 days for the whole year, 24 hours for the day, and 7,200 hours for the whole year;

3.Main Equipment introduction

1)Distillation tower introduction

Fractionating tower with structured packing

The tower is divided into:

a.In the top of the tower, the product is the first-line oil.;

b.Second-line return and recovery section, the product is CZPT -line oil;

c.Third-line return and recovery section, the product is third-line oil;
2)Tank and warehouse storage

4.The quality of oil from CZPT CZPT er:

 

5.Main product testing index

(Third-line oil) finished product quality inspection standard HVI250
1 Test items Indicators Reference standard
2 Flash point ≥220ºC

GB/T3536-1983   Flash point and flash point determination of 

petroleum products (Cleveland open cup method)
3 Pour point ≤-12ºC GB/T3535-1983  Petroleum products pour point measurement method
4 Chroma 2 GB/T6540-1986  Oil product color measurement method
5

Kinematic viscosity

 (40 degrees)

 42-55mm²/s

GB/T265-1988  Kinematic viscosity measurement and dynamic 

viscosity measurement of petroleum products 
6

Kinematic viscosity

 (100 degrees)

 Report

GB/T265-1988  Kinematic viscosity measurement and dynamic 

viscosity measurement of petroleum products 
7 Viscosity index ≥100  GB/T1995-1998   Oil Products Viscosity Index Calculation Method
8 Acid value ≤0.03(mgkoh/g)  GB/T264-1983  Oil product acid value measurement method
9

Demulsification 

(54 degrees)

 ≤10min GB/T7305-2003  Separation of oil and synthetic liquids
10 Water content Trace GB/T260-1997  Oil Products Water Content Measurement Method

6.Packing and Delivering

Used CZPT Oil/Pyrolysis Oil Recycling Plant to Base oil .

Packing Details : CZPT case package of standard export.

Delivery Details : 15-30 days after received the deposit.

We will provide the most reliable, safest mode of transportation, in order to save shipping cost.

7.Successfull Installation

FAQ

1.what process are you using ? 
The process of scraping film evaporator 
2.what is the output parameters of the base oil ? 
we can get international standard base oil ,like SN250. SN150.SN350 . 
3.did you ever build some plants in CZPT ? can we see it ? 
yes ,we have built some waste oil refining to base oil plant ,
you can visit the plant if you come to CZPT . we really welcome you to come to CZPT to visit CZPT plant .
4. do you have professional engineer to support oversea service ?
yes , we have professional engineer to support oversea service .
5.can you supply oversea installation ?
yes ,we can supply oversea installation support