Tk Series Synchronous Motor for Drive Compressors and Pumps Tk2240-16 2150 2240kv 10kv IP20

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk2240-16 2150 2240kv 10kv IP20

I. Overview
The massive 3-period synchronous motor for TK collection air compressor is a higher-overall performance series merchandise specially created and created by our business for the load of air compressor.
This sequence of motors adopts new technologies, new supplies, new processes, exquisite substance selection, and refined manufacturing. It has the qualities of little dimensions, gentle fat, lovely appearance, high performance, minimal sounds, low vibration, secure and reliable operation, and handy use and routine maintenance.

two. Implementation requirements
GB755 Rotating Motor Score and Performance
Classification of GB/T997 rotary motor composition variety, installation kind and junction box placement (IM code)
GB/T1571 A few-section synchronous motor examination method
GB/T1993 Rotating Machine Cooling Approach
GB/T4942.1 Protection course (IP) classification of the total construction of rotating electrical equipment
GB/T10068 The measurement, analysis and limit of mechanical vibration with a shaft center height of 56mm and over
GB/T10069 Rotating Device Sounds Measurement Method and Restrict
JB/T8667.1 CZPT Situations of Big Three-stage Synchronous Motor Portion 1: TK Collection
3. Simple specialized parameters
Energy range: 250~10000KW
Rated voltage: 6000, 10000V
Rated speed: 250, 273, three hundred, 333, 375, 428, five hundred, 600r/min
Rated frequency: 50HZ
Defense degree: IP00, IP20, IP23, IP44
Insulation class: F
Quota: SI
Cooling approach: IC01, IC37, IC81W
Set up approach: IM7311, IM5710, IM7312, IM7315
*Can be made in accordance to other parameters in accordance to consumer needs
Four, complex characteristics
4.one The structural layout is affordable, protected and dependable, and the capacity to action out of step is sturdy.
four.two The primary insulation composition making use of new insulating components has large voltage resistance and extended motor daily life.
4.3 The temperature rise margin is big. The motor adopts F-class insulation, and the temperature rise is assessed in accordance to the temperature rise limit of the B pole insulation.
four.4 The protection unit is advanced and full.
4.one.one The stator windings and bearings are geared up with temperature detection units, which can detect, alarm and trip.
four.four.2 Shutdown area heater with anti-condensation effect.
four.5 Massive inertia. Motors with distinct times of inertia can be produced in accordance to user requirements.
5, structure variety
five.one The total composition of this series of motors is welded with steel plates for the body, conclude include, and bottom plate. The motor is an unbiased cavity, and the slip ring can be developed with distinct safety stages in accordance to person requirements.
5.two Stator: The stator body is welded by steel plate. The motor stator outlet is led out by a large-voltage rubber cable. The outlet place can be led out from the lower component of the base or from the main junction box on the facet of the motor.
The stator core is superimposed by lower-decline silicon metal sheets, and the main sections are separated by radial air flow ducts.
The stator winding is F grade insulation, and the temperature rise is assessed according to B quality to support extend the support existence. It adopts VPI all round dipping paint treatment method, which has substantial electrical functionality, mechanical energy, insulation overall performance, dampness resistance and thermal balance.
five.3 The rotor magnetic pole main is created of laminated metal plates, and has various constructions this kind of as magnetic pole screws and T tails. The rotor bracket has ventilation holes and is geared up with a fan, which can effectively control the temperature increase of the rotor.
5.4 Adopt seat variety spherical sliding bearing. The bearings are insulated to avoid shaft currents.
Use new lubricating oil and skinny-walled bearing alloy tiles, and established electromagnetic centerline symptoms.
five.five In accordance to consumer demands, the slip ring can be developed as a positive strain air flow composition to enhance the safety of the motor. The overall size of the motor with the optimistic force air flow construction of the slip ring is a bit improved.
six. Conditions of Use
six.1 Voltage fluctuation: ±5% (It can operate beneath ±10% below the conditions of 7.three in GB755)
6.two Frequency fluctuation: ±2%
six.3 The altitude does not exceed 1000m
6.4 The maximum ambient temperature does not exceed +40ºC, and the bare minimum is 0ºC.
7, design description
 TK1250-16/2150

Outer diameter of stator punch (Φ2150mm)

Amount of poles (sixteen poles)

Rated electrical power (1250KW)
3-phase synchronous motor for compressor
8. Purchasing recommendations
eight.1 Before placing an purchase, remember to refer to the solution catalog of this series to clarify the necessary merchandise model, specs and other data. If there is a discrepancy amongst the technical specs and the samples, remember to contact our business.
eight.two The motor model, rated energy, synchronous velocity, rated voltage, rated frequency, protection stage, second of inertia, rotation route, set up kind, and so forth. must be indicated when buying.
eight.three The sample technological info sheet only lists the appropriate information of motors with rated voltages of 6KV and 10KV. If users require other voltage ranges, our firm can also give pertinent specialized information when ordering.
eight.4 The specialized info and proportions in the sample are only for reference when the consumer selects the design. The formal data will be provided by the firm soon after the deal or specialized arrangement is signed.
eight.5 If there are any other specific requirements, remember to supply the specifications and indication the appropriate technological arrangement when purchasing.

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk2240-16 2150 2240kv 10kv IP20