Tag Archives: water motor pump

Mini Mic wholesaler ro price Quiet Motor Submersible Brushless Solar Centrifugal DC Water Pump for Fountain Laser Engraving

Product Description

Features:
1.Small size, high efficiency, long life expectancy, low noise level.
2.Ceramic shaft, Carbon graphite seal low coefficient of friction.
3.0.5% non-comformity rate < 0.5%.
4.Brushless, no mechanical wear, electronic commutator.
5.The electricity and fluid are insulated from each other, sealed with epoxy, 100% water proof, leakage proof.

Specification : 

Pump body material PA66+30%GF
Size 54*54*43mm
Weight 0.11kg
Outlet/inlet dimension 6/5mm
Voltage range 5V-12V
Rated voltage DC 12V
Max lift./Pressure 3M
Flow rate 220L/H
Max CZPT 4.5W
Max loading current Rated current±0.02
Types of fluids Water, oil and acid-base solutions
Fluid working temperature -10-50ºC
Storage temperature -10-50ºC
Noise level <35dB(while pumping water)
Water proof level IP68(submersible)
Power supply Solar CZPT , CZPT ery, adapter, Power module
Life expectancy More than 20,000 hours
Working environment temperature -10-50ºC

About Bluefish Pump Company:
As one of the leading small DC water pump companies in CZPT , we produce brushless DC pump from 2009. We ship CZPT special purpose circulation pumps to manufacturers, retailer, and companies CZPT . We are based in the technological heaven of HangZhou, CZPT . We make sure that CZPT products provide best quality and standard to its CZPT ers, CZPT /ODM service is CZPT . Looking forward to establishing a healthy business relationship with you!
Customized Service Content:

  • 1. The label on the surface of the Water Pump.
  • 2. Box of the Pump.
  • 3. CZPT Cable Length.
  • 4. Type of Connector Plug.
  • 5. Waterproof CZPT CZPT .
  • 6. Water Shortage CZPT .
  • 7. CZPT s, please communicate with us.

Customized CZPT tity Requirements: 100 pcs
Additional Cost:
We will not charge any additional fees except the cost of raw materials. Usually, the unit price will be only a little higher than the normal standard model pump.

How to choose pumps:
1.Confirm your operating voltage,current,head,flow,and the size of inlet & outlet. In general, there is no flow when the head achieve the maximum head marked by factory. So if you require the pump is able to meet a certain height and also meet a certain flow, you should choose a higher maximum head than you need.Please consult us or refer to the performance curves.
2.Confirm the shape requirements, such as the type of interface, the direction of inlet & outlet, etc.
3.Confirm the working environment, such as the temperature,the medium, etc.
4.Confirm the functional requirements, such as the time control, the flow control, the speed control, etc.
5.Please feel free to contact us if you have any questions need CZPT help during choose the pump.

Why choose us?

1.Quality Control
To ensure the quality of CZPT pumps and other products,Our QC staffs do strict supplier evaluations,in-coming inspections,in-process inspections,final inspections and pre-delivery inspections.The most important is that we listen to what CZPT CZPT ers say and are always looking for ways to improve the quality of CZPT products through continuous improvement.

2.OEM Ability  
We have built stable and CZPT -term cooperate relationship with supermarkets,we can also provide ODM,OEM and Agent services to CZPT CZPT ers over the world.

3.Parts Available
We have spare parts for immediate delivery to anywhere in the world.While CZPT pumps become standard with more features than anyone else, we also offer more optional parts for CZPT pumps than anyone else.

4.Good Warranty
We take CZPT er satisfaction and product quality as the first priority for us. We supply reliable warranties and good after-sales services.

FAQ:

1.*Q:Can I get samples from you?
 A:We are honored to offer you samples for quality check.

2.*Q:What parts are manufactured by you?
A:80% of frame parts are manufactured by us.Spare parts are from CZPT top 10 CZPT suppliers.

3.*Q:What’s the leading time?(How CZPT do you need to prepare my goods?)
A:10 days for sample orders.30 days for mass production orders(based on different quantities)

4.*Q:How CZPT do I need to wait before my goods arrive?
A:3-5 days for international express.5-7 days for air transportation, 35-40 days for sea transportation.

5.*Can you put my brand name(logo) on these products?  
A:Yes,or container order.Sticker order qty over 100pcs.

6.*Q:What payment methods do you accept?  
A:T/T,L/C,Western CZPT ,Money Gram,etc.

7.*Q:What certificates do you have?
A:Since CZPT pe and CZPT ica are CZPT main markets,all of CZPT products are with CE/ISO certificate.For some models,the certificates are already CZPT .For other models,we will need your assistance to apply the certificates.

8.*Q:What is your product quality?
A:Our raw materials are purchased from qualified suppliers.And we have a strong quality control team to guarantee CZPT quality.We always care what you care!!

9.*Q:What is your warranty?
 A:Our warranty is 24 months after delivery.We always pay high attention to after sale service!!

10.*Q:How are parts availability?  
A:We keep stock of spare parts and make sure all parts CZPT whenever you need.

HP-R Grease for Wheel Bearing, Chassis, Motor near me and Water near me shop Pump

Product Description


 

HP-R grease for wheel bearing, chassis, motor and water pump

Technical Specifications  

A.     Overview:                                                                                                               

Base Oil

High grade mineral base oil

Thickener

New style complex lithium soap

Additives

High level Extreme Pressure, Antioxidant, and Antirust etc, produced under special process.

 

B.      Features:                                                                                                                

l  Great Extreme Pressure (EP) Anti-wear (AW), for lubricating of wheel hub bearing of heavy duty truck;

l  Great CZPT Temperature Capacity, for lubricating film with strong adhesion under high temperature;

l  Great Colloid Stability, CZPT er service life, CZPT er interval for adding grease.

l  Great Anti-Water, CZPT Stability, Anti-Rust and Oxidation Stability.

C.     Application:                                                                                                            

Applicable between -30ºC and +200ºC, for lubrication of wheel bearing, chassis, motor and water pump etc, for cars, coaches and heavy duty trucks and so on. Also for application of bearing of continuous mill and steel output roller.

D.     Typical Values:                                                                                                      

Item

Unit

Typical Values

Test Method

3#

Appearance

—

Blue exquisite smooth ointment

Visual

Worked cone penetration

0.1mm

220~250

GB/T269

Dropping Point

ºC ≥

325

GB/T3498

Sprinkling loss

(38oC,1h) % ≤

3.2

SH/T5719

Extreme Pressure (EP) Four-ball test

PB  N

PD  N

784

3087

SH/T 5712

E.     Operation Temperature range:        -30ºC~+200ºC.    

 

F.     Package:                                                                                                                 

          15kg, 180kg in plastic / metal containers, adjustable according to CZPT ers’ requirements.

 

Industrial Centrifugal Excavator Hydraulic Power Electric Motor Mining Sea S best and Dredging High Pressure Dewatering sales Submersible Pond Slurry Water Pump with Cutter

Product Description

Industrial Processing Submersible Slurry Pump

General Information
The Depon SS Series  Submersible Slurry Pumps are electro submersiblcentrifugal pumps designed for pumping abrasive and high density slurries in mining, heavy industry, civil construction and municipal applications.

Applications
Transfer of waste water, effluent and solids laden water for:
• Building Services
• Sumps and Basements
• CZPT
• CZPT CZPT
• Industry
• Municipal
• Processing
• Water Treatment

Technical Data
 

Flowrate   6.5 – 670l/s
Max. Head   64m
Max. Working Pressure 640kPa
Max. Solid Size   10 – 60mm
Discharge  80 – 400mm
Motor Sizes  7.5 – 315kW
Operating CZPT 980-1480RPM

Features
• 27% chrome white iron impeller.
• 27% chrome white iron integral agitator.
• 27% chrome white iron volute.
• Replaceable 27% white iron back plate.
• 420 stainless steel shaft
• 420 stainless steel shaft sleeve.
• 420 stainless steel stainer.
• All CZPT eners 420 stainless steel.
• Large cut water casing clearance.
• Low speed electro-submersible motor provides reliable continuous operation.
• CZPT incorporates thrust bearing temperature and moisture sensors.
• F class motor insulation as standard, with optional H class insulation CZPT for reliable operation in high temperature applications.
• CZPT duty cast iron motor construction.
• CZPT duty mild steel support frame with round base provides excellent stability.
• Double mechanical seal with carbon/ceramic on wet end and tungsten/ceramic on the drive end provide effective sealing between motor and wet end.
• CZPT seals are oil bath lubricated.
• External cooling options CZPT .
• Available with a wide range of protective oatings and paint options.
• Oil chamber incorporates a water leakage probe which detects when water-to-oil ratio is too high and cuts off CZPT to prevent motor damage due to oil contamination.
• CZPT incorporates a float switch in the bottom to detect the ingress of water and cut CZPT to prevent motor damage. CZPT stator incorporates shutdown temperature control sensors which  automatically detect excessive motor temperatures and shut motor down to prevent damage.
• World wide backup and service.

Materials
 

NO. Description Standard Material Material Options
1 Support Frame Mild Steel  
2 Strainer 420 CZPT Steel  
3 Pump Casing Cr27 White Iron SS316, A49,CD4MCu
4 Back Plate Cr27 White Iron SS316, A49,CD4MCu
5 Impeller Cr27 White Iron SS316, A49,CD4MCu
6 Agitator Cr27 White Iron SS316, A49,CD4MCu
7 Oil Chamber Housing Cast Iron  
8 Shaft 420 CZPT Steel  
9 Shaft Sleeve 420 CZPT Steel  
10 Wet End CZPT Seal 304 CZPT Steel  
11 Motor CZPT Seal 304 CZPT Steel  
12 Motor Casing Cast Iron  
13 Motor CZPT Jacket Fabricated Mild Steel  
14 Lifting Brace Mild Steel  
15 Bearing Covers Cast Iron  
16 Oil Chamber Cover Cast Iron

 

Model Selection Table  
 

Model Outlet Dia. (mm) Capacity (m³/h) Head (m) Power (Kw) Speed (r/min) Max.Dia.of Solid (mm) Pump CZPT ght  (kg)

SS45-15-5.5

  80 45 15 5.5 1460 13 100
SS15-20-5.5  80 15 20 5.5 1460 13 100
SS30-30-7.5 80 30 30 7.5 1460 13 114
SS50-26-11 80 50 26 11 1460 13 165
SS75-25-15 100 75 25 15 1460 13 220
SS150-18-18.5 150 150 18 18.5 980 32 550
SS200-12-22 150 200 15 22 980 45 580
SS60-46-30 150 60 46 30 980 21 700
SS150-30-30 150 150 30 30 980 21 550
SS300-20-37 200 300 20 37 980 28 775
SS200-30-45 150 200 30 45 980 36 1000
SS500-15-45 250 500 15 45 980 46 1100
SS250-35-55 150 250 35 55 980 36 1140
SS600-15-55 250 600 15 55 980 46 1140
SS350-35-75 200 350 35 75 980 28 1550
SS500-20-75 200 500 20 75 980 25 1550
SS200-60-90 150 200 60 90 980 14 1550
SS400-40-90 200 400 40 90 980 28 1550
SS600-30-110 200 600 30 110 980 28 1970
SS1000-18-110 300 1000 18 110 980 50 1970
SS500-45-132 200 500 45 132 980 28 2000
SS1000-22-132 300 1000 22 132 980 50 2000
SS650-52-160 200 650 52 160 980 28 2650
SS780-50-185 300 780 50 185 980 38 3330
SS800-55-220 300 800 55 220 980 38 3400
SS1250-35-220 350 1250 35 220 980 45 3400
SS1750-30-250 350 1750 30 250 980 55 3500
SS2000-35-315 400 2000 35 315 980 60 3700

Note: Please contact us, we will give you the better solution.

FAQ

A: What kind of company you are?
Q: HangZhou Depon Pump Company is professional manufacturer in pumps. After accumulation and development of many years, we have formed a complete system of pump design, selection, application, manufacture, marketing and maintenance. We have passed CE, SGS certificate. Our CZPT ers are at home and abroad. Hope to coorperate with the CZPT friends. 

Q: What’s your MOQ?
A: Trial sample order is OK.
 
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A or as CZPT er required
 
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
 
Q: What is the delivery time?
A: 7-30 days according to CZPT er quantities.
 
Q: Can you do CZPT brand?
A: Yes, Welcome.
 
Q: What information should I offer to get pump solution?
1, Head:     m
2, Flow:    m3/h
3, CZPT Solid size:    mm
4, Particle shape (smooth or sharp):
5, Medium pH level:
6,Specific Gravity of the Medium:
7, Temperature:
8, CZPT type:
9. CZPT supply: CZPT ctric or Dlesel
10, Voltage and Frequency of the CZPT : 

Welcome inquiry! 
Shirley She

Contact: 
 
 
 
 
 
 

Long Shaft Vertical Turbine Sea Water Industry Cit manufacturer y Flood Control Submerged Drainage Water Pump with Di wholesaler esel Engine and Electric Motor Drive

Product Description

  • Why choose us?
  • Specialized production Manufactory for Vertical Turbine Pump
  • Focus on technological innovation, Over Industry leading level
  • Good experience at Domestic and oversea market
  • Carefully paint  for CZPT appearance
  • Years of CZPT service standards, Engineer one-to-one service

Product Description

 

Vertical Turbine Pump

Long Shaft Vertical Turbine Sea Water Industry City Flood Control Drainage Pump
This kind of  vertical drainage pump is mainly used for pumping no corrosion, temperature less than 60 °C, suspended solids (not including fiber, the grits) less than 150 mg/L content of the sewage or waste water.
VTP type vertical drainage pump is in VTP type vertical water pumps, and on the basis of the increase and the collar, set the tube oil lubrication is water. Can smoke temperature below 60 °C, send to contain a certain solid grain (such as scrap iron and fine sand, coal, etc.) of sewage or waste water.

 

Product Parameters

Capacity 20-5000 m3/h
Head 3-150 m 
Working Temperature 0-60 ºC
Power 1.5-3400KW

How It Works:

 The vertical turbine pump is normally driven by an AC electric induction motor or a diesel engine via a right angle drive. The end of the pump consists of a rotating impeller that is joined to a shaft and guides the well water into a diffuser casing known as a bowl.

 Pumps with multi-stage arrangements use several impellers on a single shaft to generate higher pressure that would be required for pumping water from deeper wells or where higher pressure (head) is required at ground level.

 A vertical turbine pump works when water comes through the pump from the bottom through a bell-shaped device known as a suction bell. The water then moves into the first stage impeller, which increases the velocity of the water. The water then moves into the diffuser casing directly above the impeller, where the high velocity energy is transformed into high pressure. The diffuser casing also guides the fluid into the next impeller located directly above the diffuser casing. The process goes on through all the stages in the pump. 

The VTP pump line is normally designed to operate in wells or sumps. Its bowl assembly consists primarily of a suction case or bell, one or more pump bowls and a discharge case. The pump bowl assembly is positioned in the sump or well at a depth to provide the proper submergence.
 

Product Advantage

√ Corrosion resistance main part material, CZPT brand bearing, thordon bearings suitable for sea water.

√ Excellent design for high Efficiency save energy for you.

√ Flexible installation method suitable for different site.

√ Stable running, Easy to install and maintain.

1.The inlet shall be vertical downward and the outlet horizontal above or under the base.
2.The impeller of pump is classified into enclosed type and half-opening type, and three adjustments: CZPT -adjustable, semi adjustable and full adjustable. It is unnecessary to fill the water when the impellers are fully immersed in the pumped liquid.
3.On the basis o Pump, this type is additionally fit with muff armor tubing and the impellers are made of abrasive resistant material, widening the applicability of pump.
4.The connection of impeller shaft, transmission shaft, and motor shaft applies the shaft coupling nuts.
5.It applies water lubricating rubber bearing and packing seal.
6.The motor generally applies standard Y series tri-phase asynchronous motor, or YLB type tri-phase asynchronous motor as requested. When assembling Y type motor, the pump is designed with anti- reverse device, effectively avoiding reverse of pump. 

More detail about CZPT VTP series CZPT Shaft Vertical Turbine Pump for curve and dimension and data sheet please conatct Tongke.

Detailed Photos

FAQ

Note before order
1.The temperature of medium shall not be higher than 60 .
2.The medium shall be CZPT and PH value between 6.5~8.5. If the medium is not consistent to the requirements, specify in the order list.
3.For VTP type pump, the content of suspended substances in the medium shall be less than 150 mg/L;  for VTP type pump, the max. Diameter of solid particles in the medium shall be less than 2 mm and the content less than 2 g/L.
4 VTP type pump shall be connected with clean water or soapy water outside to lubricate the rubber bearing. For two stage pump, lubricant pressure shall not be less than operational pressure.

Application

Petrochemical Industry pump
Seawater desalination plant or salt water pump
Municipal CZPT
City flood control and drainage
Industry plant
Industrial architecture
Sewage treatment CZPT
 

Sample Project

PROJECT NO.1

PROJECT NO.2               VTP pump for sea water plant 

PROJECT NO.3         VTP pump for CZPT Works

PROJECT NO.4    

Company Profile