Tag Archives: gear motor cost

China High Quality Low Cost 22mm Planetary Gearbox 12V DC Gear Motor brushless motor

Product Description

High Quality low value 22mm planetary gearbox 12v dc equipment motor

one.Functions

one) Step Angle  Accuracy: ±5%
two) Resistance Accuracy: ±10%
3) Inductance Accuracy: ±20%
4) Temperature Rise: 80°C Max
5) Ambient Temperature: -20°C~+50°C
6) Insulation Resistance: 100MΩ Min., 500VDC
seven) Dielectric Power:  500VAC for 1 minute
8) Shaft Radial Play:  0.02Max (450g-load)
nine) Shaft Axial Enjoy: 0.08Max (450g-load)

2.Relevant Requirements

1) 42mm series

Design DMW421 DMW422 DMW423
Voltage V 24
No load speed rpm 5000 5000 5000
Rated torque Nm .063 .094 .125
Rated Speed rpm 4000 4000 4000
Rated Current A 1.7 2.five 3.5
Torque(max) Nm .19 .27 .38
Back again-EMF constant V/Krpm three.thirteen three.thirteen 3.15
Torque Constant Nm/A .039 .04 .04
Resistance ohm one.five .fifty three .74
Bodyweight Kg .3 .four .five
Size mm forty one fifty one six

two) 70mmSeries

Model Rated Voltage No load
velocity
Rated torque Rated Speed Rated
Current
Rated
electrical power
     L
VDC RPM Nm rpm A W mm
DMW701 forty eight 3500 .5 3000 4.3 157 86
DMW702 forty eight 3500 one 3000 eight.7 314 116
DMW703 48 3500 one.five 3000 twelve.9 471 136

3) 80mmSeries

Product DMW801 DMW802 DMW803
Voltage V 24
No load speed rpm 4200 4200 4200
Rated torque Nm .25 .5 .seventy five
Rated Speed rpm 3000 3000 3000
Rated Current A five.2 10.5 15
Rated power W 79 157 236
Back-EMF constant V/Krpm 9 9.2 nine.5
Torque Constant Nm/A .06 .052 .05
Resistance ohm .5 .43 .35
Bodyweight Kg one.six 2.two three
Duration mm 75 95 115

4) 86mmSeries

Model DMW861 DMW862 DMW863
Voltage V forty eight
No load speed rpm 3500 3500 3400
Rated torque Nm 1. one.8 two.five
Rated Speed rpm 3000 3000 3000
Rated Current A  8.6 14.8 20
Torque(max) Nm 3. five.four seven.five
Back again-EMF constant V/Krpm nine.8 nine.eight ten
Torque Constant Nm/A .thirteen .thirteen .14
Resistance ohm .32 .15 .one
Excess weight Kg 2.two 3.two four.2
Size mm eighty a hundred and five a hundred thirty

5) 60mmSeries

Model DMW601 DMW602 DMW603
Voltage V 36
No load speed rpm 4100 4100 4100
Rated torque Nm .25 .5 .seventy five
Rated Speed rpm 3000 3000 3000
Rated Current A 3 six 9
Torque(max) Nm .seventy five one.five two
Back again-EMF constant V/Krpm six.2 six.5 6.5
Torque Constant Nm/A .043 .045 .041
Resistance ohm .59 .26 .two
Fat Kg .nine one.two 1.6
Duration mm 78 99 a hundred and twenty

six) 57mm Series

Product DMW571 DMW572 DMW573 DMW574
Voltage V 36
No load speed rpm 5200 5200 5300 5400
Rated torque Nm .11 .22 .32 .forty two
Rated Speed rpm 4000 4000 4000 4000
Rated Current A 1.eight 3.2 four.seven six.five
Torque(max) Nm .3 .five .8 one.2
Back again-EMF constant V/Krpm four.five 4.8 four.83 4.9
Torque Constant Nm/A .072 .078 .08 .09
Resistance ohm 1.7 .75 .five .39
Weight Kg .forty five .eight one.1 one.4
Duration mm fifty five seventy five ninety five a hundred and fifteen

7) 57 High Torque

Design DMW571 DMW572 DMW573 DMW574
Voltage V 36
No load speed rpm 5200 5200 5200 5200
Rated torque Nm .14 .28 .43 .49
Rated Speed rpm 4000 4000 4000 4000
Rated Current A two.two four.five 6.8 7.9
Torque(max) Nm .4 .6 .9 1.five
Back again-EMF constant V/Krpm four.5 4.8 4.eighty three 4.nine
Torque Constant Nm/A .072 .078 .08 .09
Resistance ohm two .9 .seven .five
Weight Kg .5 .9 one.3 one.8
Length mm fifty five seventy five 95 115

three.Outlines/Drawings

four.About US

five.Primary Items

HangZhou Shnmotor is a developing producing and investing organization which aims at the electrical goods of refrigeration industry.
We have a highly qualified team, which has above 8 several years encounter on Equipment creating, manufacturing, controlling and consumer support principle heart & soul.
ISO 9000 standard and 6S management ensure the most efficient quality control on every single portion and each process of the merchandise. 

Our Primary Merchandise as underneath:
one)Brushless DC Motor
2)Setpping Motor 
three)AC Motor
4)Motor Team
(Motor+Reducer+Driver+Brake)

six.Application

Deal and Shipping

one.FedEX / DHL / UPS / TNT for samples,Doorway to door service
two.By sea for batch items
three.Customs specifying freight forwarders or negotiable transport techniques
4.Shipping Time:twenty-25 Times for samples30-35 Days for batch merchandise
five.Payment Phrases:T/T,L/C at sight,D/P and so forth.

FAQ
Q1. When can I get the quotation?
We typically quote inside 24 hours after we get your inquiry. If you are urgent to get the cost, please deliver the message on  and  or contact us right.

Q2. How can I get a sample to check your quality?
After price tag confirmed, you can requiry for samples to verify good quality.
If you require the samples, we will charge for the sample expense. But the sample cost can be refundable when your amount of very first order is earlier mentioned the MOQ

Q3. Can you do OEM for us?
Sure, the merchandise packing can be made as you want.

Q4. How about MOQ?
one pcs for carton box.

Q5. What is your main marketplace?
Jap Europe, Southeast Asia, South The us.

 
Make sure you feel  free to make contact with us if you have any question.

 

US $30-100
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Adjust Speed
Excitation Mode: Excited
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 8

###

Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model DMW421 DMW422 DMW423
Voltage V 24
No load speed rpm 5000 5000 5000
Rated torque Nm 0.063 0.094 0.125
Rated Speed rpm 4000 4000 4000
Rated Current A 1.7 2.5 3.5
Torque(max) Nm 0.19 0.27 0.38
Back-EMF constant V/Krpm 3.13 3.13 3.15
Torque Constant Nm/A 0.039 0.04 0.04
Resistance ohm 1.5 0.53 0.74
Weight Kg 0.3 0.4 0.5
Length mm 41 51 6

###

Model Rated Voltage No load
speed
Rated torque Rated Speed Rated
Current
Rated
power
     L
VDC RPM Nm rpm A W mm
DMW701 48 3500 0.5 3000 4.3 157 86
DMW702 48 3500 1 3000 8.7 314 116
DMW703 48 3500 1.5 3000 12.9 471 136

###

Model DMW801 DMW802 DMW803
Voltage V 24
No load speed rpm 4200 4200 4200
Rated torque Nm 0.25 0.5 0.75
Rated Speed rpm 3000 3000 3000
Rated Current A 5.2 10.5 15
Rated power W 79 157 236
Back-EMF constant V/Krpm 9 9.2 9.5
Torque Constant Nm/A 0.06 0.052 0.05
Resistance ohm 0.5 0.43 0.35
Weight Kg 1.6 2.2 3
Length mm 75 95 115

###

Model DMW861 DMW862 DMW863
Voltage V 48
No load speed rpm 3500 3500 3400
Rated torque Nm 1.0 1.8 2.5
Rated Speed rpm 3000 3000 3000
Rated Current A  8.6 14.8 20
Torque(max) Nm 3.0 5.4 7.5
Back-EMF constant V/Krpm 9.8 9.8 10
Torque Constant Nm/A 0.13 0.13 0.14
Resistance ohm 0.32 0.15 0.1
Weight Kg 2.2 3.2 4.2
Length mm 80 105 130

###

Model DMW601 DMW602 DMW603
Voltage V 36
No load speed rpm 4100 4100 4100
Rated torque Nm 0.25 0.5 0.75
Rated Speed rpm 3000 3000 3000
Rated Current A 3 6 9
Torque(max) Nm 0.75 1.5 2
Back-EMF constant V/Krpm 6.2 6.5 6.5
Torque Constant Nm/A 0.043 0.045 0.041
Resistance ohm 0.59 0.26 0.2
Weight Kg 0.9 1.2 1.6
Length mm 78 99 120

###

Model DMW571 DMW572 DMW573 DMW574
Voltage V 36
No load speed rpm 5200 5200 5300 5400
Rated torque Nm 0.11 0.22 0.32 0.42
Rated Speed rpm 4000 4000 4000 4000
Rated Current A 1.8 3.2 4.7 6.5
Torque(max) Nm 0.3 0.5 0.8 1.2
Back-EMF constant V/Krpm 4.5 4.8 4.83 4.9
Torque Constant Nm/A 0.072 0.078 0.08 0.09
Resistance ohm 1.7 0.75 0.5 0.39
Weight Kg 0.45 0.8 1.1 1.4
Length mm 55 75 95 115

###

Model DMW571 DMW572 DMW573 DMW574
Voltage V 36
No load speed rpm 5200 5200 5200 5200
Rated torque Nm 0.14 0.28 0.43 0.49
Rated Speed rpm 4000 4000 4000 4000
Rated Current A 2.2 4.5 6.8 7.9
Torque(max) Nm 0.4 0.6 0.9 1.5
Back-EMF constant V/Krpm 4.5 4.8 4.83 4.9
Torque Constant Nm/A 0.072 0.078 0.08 0.09
Resistance ohm 2 0.9 0.7 0.5
Weight Kg 0.5 0.9 1.3 1.8
Length mm 55 75 95 115
US $30-100
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Adjust Speed
Excitation Mode: Excited
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 8

###

Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model DMW421 DMW422 DMW423
Voltage V 24
No load speed rpm 5000 5000 5000
Rated torque Nm 0.063 0.094 0.125
Rated Speed rpm 4000 4000 4000
Rated Current A 1.7 2.5 3.5
Torque(max) Nm 0.19 0.27 0.38
Back-EMF constant V/Krpm 3.13 3.13 3.15
Torque Constant Nm/A 0.039 0.04 0.04
Resistance ohm 1.5 0.53 0.74
Weight Kg 0.3 0.4 0.5
Length mm 41 51 6

###

Model Rated Voltage No load
speed
Rated torque Rated Speed Rated
Current
Rated
power
     L
VDC RPM Nm rpm A W mm
DMW701 48 3500 0.5 3000 4.3 157 86
DMW702 48 3500 1 3000 8.7 314 116
DMW703 48 3500 1.5 3000 12.9 471 136

###

Model DMW801 DMW802 DMW803
Voltage V 24
No load speed rpm 4200 4200 4200
Rated torque Nm 0.25 0.5 0.75
Rated Speed rpm 3000 3000 3000
Rated Current A 5.2 10.5 15
Rated power W 79 157 236
Back-EMF constant V/Krpm 9 9.2 9.5
Torque Constant Nm/A 0.06 0.052 0.05
Resistance ohm 0.5 0.43 0.35
Weight Kg 1.6 2.2 3
Length mm 75 95 115

###

Model DMW861 DMW862 DMW863
Voltage V 48
No load speed rpm 3500 3500 3400
Rated torque Nm 1.0 1.8 2.5
Rated Speed rpm 3000 3000 3000
Rated Current A  8.6 14.8 20
Torque(max) Nm 3.0 5.4 7.5
Back-EMF constant V/Krpm 9.8 9.8 10
Torque Constant Nm/A 0.13 0.13 0.14
Resistance ohm 0.32 0.15 0.1
Weight Kg 2.2 3.2 4.2
Length mm 80 105 130

###

Model DMW601 DMW602 DMW603
Voltage V 36
No load speed rpm 4100 4100 4100
Rated torque Nm 0.25 0.5 0.75
Rated Speed rpm 3000 3000 3000
Rated Current A 3 6 9
Torque(max) Nm 0.75 1.5 2
Back-EMF constant V/Krpm 6.2 6.5 6.5
Torque Constant Nm/A 0.043 0.045 0.041
Resistance ohm 0.59 0.26 0.2
Weight Kg 0.9 1.2 1.6
Length mm 78 99 120

###

Model DMW571 DMW572 DMW573 DMW574
Voltage V 36
No load speed rpm 5200 5200 5300 5400
Rated torque Nm 0.11 0.22 0.32 0.42
Rated Speed rpm 4000 4000 4000 4000
Rated Current A 1.8 3.2 4.7 6.5
Torque(max) Nm 0.3 0.5 0.8 1.2
Back-EMF constant V/Krpm 4.5 4.8 4.83 4.9
Torque Constant Nm/A 0.072 0.078 0.08 0.09
Resistance ohm 1.7 0.75 0.5 0.39
Weight Kg 0.45 0.8 1.1 1.4
Length mm 55 75 95 115

###

Model DMW571 DMW572 DMW573 DMW574
Voltage V 36
No load speed rpm 5200 5200 5200 5200
Rated torque Nm 0.14 0.28 0.43 0.49
Rated Speed rpm 4000 4000 4000 4000
Rated Current A 2.2 4.5 6.8 7.9
Torque(max) Nm 0.4 0.6 0.9 1.5
Back-EMF constant V/Krpm 4.5 4.8 4.83 4.9
Torque Constant Nm/A 0.072 0.078 0.08 0.09
Resistance ohm 2 0.9 0.7 0.5
Weight Kg 0.5 0.9 1.3 1.8
Length mm 55 75 95 115

Benefits of a Planetary Motor

If you’re looking for an affordable way to power a machine, consider purchasing a Planetary Motor. These units are designed to provide a massive range of gear reductions, and are capable of generating much higher torques and torque density than other types of drive systems. This article will explain why you should consider purchasing one for your needs. And we’ll also discuss the differences between a planetary and spur gear system, as well as how you can benefit from them.

planetary gears

Planetary gears in a motor are used to reduce the speed of rotation of the armature 8. The reduction ratio is determined by the structure of the planetary gear device. The output shaft 5 rotates through the device with the assistance of the ring gear 4. The ring gear 4 engages with the pinion 3 once the shaft is rotated to the engagement position. The transmission of rotational torque from the ring gear to the armature causes the motor to start.
The axial end surface of a planetary gear device has two circular grooves 21. The depressed portion is used to retain lubricant. This lubricant prevents foreign particles from entering the planetary gear space. This feature enables the planetary gear device to be compact and lightweight. The cylindrical portion also minimizes the mass inertia. In this way, the planetary gear device can be a good choice for a motor with limited space.
Because of their compact footprint, planetary gears are great for reducing heat. In addition, this design allows them to be cooled. If you need high speeds and sustained performance, you may want to consider using lubricants. The lubricants present a cooling effect and reduce noise and vibration. If you want to maximize the efficiency of your motor, invest in a planetary gear hub drivetrain.
The planetary gear head has an internal sun gear that drives the multiple outer gears. These gears mesh together with the outer ring that is fixed to the motor housing. In industrial applications, planetary gears are used with an increasing number of teeth. This distribution of power ensures higher efficiency and transmittable torque. There are many advantages of using a planetary gear motor. These advantages include:
Motor

planetary gearboxes

A planetary gearbox is a type of drivetrain in which the input and output shafts are connected with a planetary structure. A planetary gearset can have three main components: an input gear, a planetary output gear, and a stationary position. Different gears can be used to change the transmission ratios. The planetary structure arrangement gives the planetary gearset high rigidity and minimizes backlash. This high rigidity is crucial for quick start-stop cycles and rotational direction.
Planetary gears need to be lubricated regularly to prevent wear and tear. In addition, transmissions must be serviced regularly, which can include fluid changes. The gears in a planetary gearbox will wear out with time, and any problems should be repaired immediately. However, if the gears are damaged, or if they are faulty, a planetary gearbox manufacturer will repair it for free.
A planetary gearbox is typically a 2-speed design, but professional manufacturers can provide triple and single-speed sets. Planetary gearboxes are also compatible with hydraulic, electromagnetic, and dynamic braking systems. The first step to designing a planetary gearbox is defining your application and the desired outcome. Famous constructors use a consultative modeling approach, starting each project by studying machine torque and operating conditions.
As the planetary gearbox is a compact design, space is limited. Therefore, bearings need to be selected carefully. The compact needle roller bearings are the most common option, but they cannot tolerate large axial forces. Those that can handle high axial forces, such as worm gears, should opt for tapered roller bearings. So, what are the advantages and disadvantages of a helical gearbox?

planetary gear motors

When we think of planetary gear motors, we tend to think of large and powerful machines, but in fact, there are many smaller, more inexpensive versions of the same machine. These motors are often made of plastic, and can be as small as six millimeters in diameter. Unlike their larger counterparts, they have only one gear in the transmission, and are made with a small diameter and small number of teeth.
They are similar to the solar system, with the planets rotating around a sun gear. The planet pinions mesh with the ring gear inside the sun gear. All of these gears are connected by a planetary carrier, which is the output shaft of the gearbox. The ring gear and planetary carrier assembly are attached to each other through a series of joints. When power is applied to any of these members, the entire assembly will rotate.
Compared to other configurations, planetary gearmotors are more complicated. Their construction consists of a sun gear centered in the center and several smaller gears that mesh with the central sun gear. These gears are enclosed in a larger internal tooth gear. This design allows them to handle larger loads than conventional gear motors, as the load is distributed among several gears. This type of motor is typically more expensive than other configurations, but can withstand the higher-load requirements of some machines.
Because they are cylindrical in shape, planetary gear motors are incredibly versatile. They can be used in various applications, including automatic transmissions. They are also used in applications where high-precision and speed are necessary. Furthermore, the planetary gear motor is robust and is characterized by low vibrations. The advantages of using a planetary gear motor are vast and include:
Motor

planetary gears vs spur gears

A planetary motor uses multiple teeth to share the load of rotating parts. This gives planetary gears high stiffness and low backlash – often as low as one or two arc minutes. These characteristics are important for applications that undergo frequent start-stop cycles or rotational direction changes. This article discusses the benefits of planetary gears and how they differ from spur gears. You can watch the animation below for a clearer understanding of how they operate and how they differ from spur gears.
Planetary gears move in a periodic manner, with a relatively small meshing frequency. As the meshing frequency increases, the amplitude of the frequency also increases. The amplitude of this frequency is small at low clearance values, and increases dramatically at higher clearance levels. The amplitude of the frequency is higher when the clearance reaches 0.2-0.6. The amplitude increases rapidly, whereas wear increases slowly after the initial 0.2-0.6-inch-wide clearance.
In high-speed, high-torque applications, a planetary motor is more effective. It has multiple contact points for greater torque and higher speed. If you are not sure which type to choose, you can consult with an expert and design a custom gear. If you are unsure of what type of motor you need, contact Twirl Motor and ask for help choosing the right one for your application.
A planetary gear arrangement offers a number of advantages over traditional fixed-axis gear system designs. The compact size allows for lower loss of effectiveness, and the more planets in the gear system enhances the torque density and capacity. Another benefit of a planetary gear system is that it is much stronger and more durable than its spur-gear counterpart. Combined with its many advantages, a planetary gear arrangement offers a superior solution to your shifting needs.
Motor

planetary gearboxes as a compact alternative to pinion-and-gear reducers

While traditional pinion-and-gear reducer design is bulky and complex, planetary gearboxes are compact and flexible. They are suitable for many applications, especially where space and weight are issues, as well as torque and speed reduction. However, understanding their mechanism and working isn’t as simple as it sounds, so here are some of the key benefits of planetary gearing.
Planetary gearboxes work by using two planetary gears that rotate around their own axes. The sun gear is used as the input, while the planetary gears are connected via a casing. The ratio of these gears is -Ns/Np, with 24 teeth in the sun gear and -3/2 on the planet gear.
Unlike traditional pinion-and-gear reducer designs, planetary gearboxes are much smaller and less expensive. A planetary gearbox is about 50% smaller and weighs less than a pinion-and-gear reducer. The smaller gear floats on top of three large gears, minimizing the effects of vibration and ensuring consistent transmission over time.
Planetary gearboxes are a good alternative to pinion-and-gear drive systems because they are smaller, less complex and offer a higher reduction ratio. Their meshing arrangement is similar to the Milky Way, with the sun gear in the middle and two or more outer gears. They are connected by a carrier that sets their spacing and incorporates an output shaft.
Compared to pinion-and-gear reduces, planetary gearboxes offer higher speed reduction and torque capacity. As a result, planetary gearboxes are small and compact and are often preferred for space-constrained applications. But what about the high torque transfer? If you’re looking for a compact alt

China High Quality Low Cost 22mm Planetary Gearbox 12V DC Gear Motor     brushless motor	China High Quality Low Cost 22mm Planetary Gearbox 12V DC Gear Motor     brushless motor
editor by czh 2023-01-18

in Cartagena Colombia sales price shop near me near me shop factory supplier Bwd3 Horizontal Cycloidal Pinwheel Gear Speed Reducer with Electrical Motor manufacturer best Cost Custom Cheap wholesaler

  in Cartagena Colombia  sales   price   shop   near me   near me shop   factory   supplier Bwd3 Horizontal Cycloidal Pinwheel Gear Speed Reducer with Electrical Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

Thanks to our broad solution assortment and abundant ordeals in this market, The high precise CNC equipment, such as Gradual-feeding wire-lower machine, jig grinding device and electric powered discharge device, makes certain the leading high quality precision of mould processing, with the substantial efficient and environmental security acid rolling line currently being the premier uncooked substance converting products in the field in china The wildly use of automated milling machine, high-speed automated feeding punch, substantial pace computerized rolling and assembling machine assures the high quality and efficiency of factors and chain producing. Our merchandise assortment involves all types of helical gear, spur equipment, bevel gear, gear rack, worm equipment, sprockets,chains, bearings.


Rated Enter EPT of Cycloidal EPT for One-stage EPT

Stand no. EPT Ratio
11 seventeen 23 29 35 43 59 71 87
X2
B0
.75
.fifty five
.55 .37
.twenty five
X3
B1
two.two
one.five
one.five
one.1
1.one
.seventy five
.fifty five
X4
B2
four
3
two.2
one.five
1.5
1.one
1.one
.seventy five
.seventy five
X5
B3
7.five
five.five
5.five
four
4
three
three
2.2
two.two
one.five
one.five
X6
B4
eleven
7.five
seven.five
5.five
5.five
4
four
three
3
2.2
two.two
X7 fifteen
11
eleven
seven.five
seven.five
five.5
five.five
four
4
X8
B5
eighteen.5
15
fifteen
eleven
11
seven.5
seven.five
five.5
five.five
X9
B6
22
eighteen.5
eighteen.five
fifteen
15
11
eleven

Attribute:

Higher pace ratio and large effectiveness of one phase EPT, can achieve one:87 reduction ratio, the performance of far more than 90%, if the use of multi-stage EPT, reduction ratio is bigger.
Compact framework and tiny quantity thanks to the adoption of planetary EPT principle, the input shaft output shaft in the exact same aXiHu (West Lake) Dis.s line, so that its product to obtain the smallest possible size.
Clean running noise low cycloidal needle enamel meshing tooth number, overlap coefficient is huge and has the mechanism of elements balance, vibration and sounds limit in the least diploma.
The use of reputable, EPT existence because the primary elements of the large carbon chromium metal material, right after quenching therapy (HRC58 ~ 62) to receive substantial strength, and, element of the EPT contact making use of rolling friction, so EPT existence.

Application area

Cycloid EPT EPT uses cycloid tooth meshing, planetary EPT principle, so it is typically named planetary cycloid EPT.
Planetary cycloid pin-wheel EPT can be extensively utilised in petroleum, environmental safety, chemical sector, cement, transportation, textile, pharmaceutical, meals, printing, lifting, mining, metallurgy, building, EPT generation and other EPT, as a driving or decelerating device, the EPT is divided into horizontal, vertical, biaXiHu (West Lake) Dis.al and immediate assembly manner.
Its EPT smooth composition in several cases can substitute the ordinary cylindrical EPT EPT and worm EPT EPT, for that reason, planetary cycloid EPT EPT is commonly utilised in various EPT and fields, by the greater part of end users are EPTly welcomed.

Characteristics of transportation and EPT

Limited delivery interval,to guarantee well timed supply.
TigEPT EPT,to make sure the items are not ruined throughout transportation.
Various modes of transportation,to guarantee safe and timely transportation
Follow up the EPT approach of buy,to ensure product delivery to consumers.
EPT shelf lifestyle, to ensure consumer knowledge.

FAQ

Q1: Are you a trading firm or a manufacturer ?
A: We are a manufacturer in EPTngsu Province, EPT. Our business owns the capacity of production, processing, developing and R ampD. We welcome your check out.

Q2: How we choose models and requirements?
A: According to the certain particulars of the demands from the component of enquiry, we will recommend the products’ designs on synthesizing the variables of field of items usage, EPT, torque arm and ratio…

Q3: How is your cost? Can you provide any price reduction?
A: Our charges are alwaEPTcompetitive. If the client can area a large buy, we certainly will allow price cut.

This fall: How EPT should I hold out for the feedback following I send the enquiry?
A: We will reply the enquiries with no any delay, 12 hours at most.

Q5: What is your merchandise warranty period?
A: We have the certifications of ISO99001,CE,

Q6: What EPT are your EPTes currently being utilized?
A: Our EPTes are commonly utilized to metallurgical equipment, mining gear, EPT products, food EPTry, EPT products, tobacco tools and so on.

  in Cartagena Colombia  sales   price   shop   near me   near me shop   factory   supplier Bwd3 Horizontal Cycloidal Pinwheel Gear Speed Reducer with Electrical Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Cartagena Colombia  sales   price   shop   near me   near me shop   factory   supplier Bwd3 Horizontal Cycloidal Pinwheel Gear Speed Reducer with Electrical Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

in As-Suways Egypt sales price shop near me near me shop factory supplier 3V 13mm Small Electric Planetary Reduction Gear Motor for Cosmetic Tool manufacturer best Cost Custom Cheap wholesaler

  in As-Suways Egypt  sales   price   shop   near me   near me shop   factory   supplier 3V 13mm Small Electric Planetary Reduction Gear Motor for Cosmetic Tool manufacturer   best   Cost   Custom   Cheap   wholesaler

We are looking forward to building profitable company relationships with new consumers close to the globe in the foreseeable future. Because of to our wide product variety and prosperous ordeals in this industry, a specialized supplier of a complete assortment of chains, sprockets, gears, gear racks, V-belts, couplings and reducers. Note:

The requirements can be made according to the customer’s requirements!

Application:

Electric powered Drill, ScrewEPTr, Scanners, Printers, Vending EPT, Window Curtain, Coffee EPT, Electrical Lock, and so forth.

Parameter:

Reduction ratio 1/four 1/16 one/sixty four 1/256 one/1571 one/4096
2.4V Rated torque(g.cm) twenty 70 250 840 2000 2000
Rated velocity(rpm) 2400 600 one hundred fifty 38 10 two.eight
3.0V Rated torque(g.cm) 19 sixty five 230 780 2000 2000
Rated pace(rpm) 2400 610 one hundred fifty 39 ten 2.eight
Rotation route CW CW CW CW CW CW
Duration(L-mm) twelve.eight sixteen.one 19.4 22.seven 26. 29.3

Rated volt(V) Rated torque(g.cm) Rated pace(rpm) Rated recent(mA) No-load velocity(rpm) No-load existing(mA) Weight(g)
2.4 six. ten thousand lt=450 12500 lt=a hundred thirty 13
3. five.six ten thousand lt=340 12500 lt=80 13

About Us:

We EPTized in investigating, deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ing, and servicing electric motors, EPT, and high precision EPTs with the tiny module. Soon after many years of deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment, we have an independent item design and style and R ampD crew, services staff, and a expert good quality control team. To recognize our service principle greater, give higher-good quality goods and exceptional support, we have been fully commited to the main capability and coaching. We have a EPT manufacturing facility in NanEPTg, which makes higher precision small mold EPTs, EPT shaft, EPT, and planetary EPT assembling.

Function-stream:

Certification:
RoHS, CE, and a lot more…

Services:

ODM amp OEM
EPT layout and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment

Deal ampShip:

Carton, pallet, or what you want
The shipping and delivery time is about thirty-45 times.

Customer’s Going to:

FAQ:

one. Can you customized EPT?
Yes.

2. DO you provide the sample?
Of course.

3. Do you offer technical assist?
Yes

four. Do you have a factory?
Of course, we are a skilled producer.

5. Can I arrive to your company to go to?
Yes

  in As-Suways Egypt  sales   price   shop   near me   near me shop   factory   supplier 3V 13mm Small Electric Planetary Reduction Gear Motor for Cosmetic Tool manufacturer   best   Cost   Custom   Cheap   wholesaler

  in As-Suways Egypt  sales   price   shop   near me   near me shop   factory   supplier 3V 13mm Small Electric Planetary Reduction Gear Motor for Cosmetic Tool manufacturer   best   Cost   Custom   Cheap   wholesaler