China 1W 12V 24V 16mm Od DC Motor with Planetary Gear Box for Fingerprint Lock and Robot Toy motor engine

Item Description

A. Specification of 1W 12V 24V 16MM OD DC Motor With Planetary Gear Box for Fingerprint Lock and Robot Toy:

one. Voltage: 3/6/12/24V
2. Velocity:3-4000RPM
three. Torque: one-4Kgf.cm
4. Output Power: .1-1W
five. Gearbox Ratio:  one:4 to 1: 2418
six. Gearbox Diameter: 16mm
seven. Gearbox Duration: 15.8-26.6mm
8. Motor Size: 26.9mm
9. Shaft Diameter: 3mm
10. Shaft Length: Customized

Note: The information sheet is only for reference, We can make the motor in accordance to your requirement following Analysis

B. Organization Capability

HangZhou CZPT Co. Ltd is a producer and exporter of a variety of of motors with above 10 several years encounter.
Our merchandise ranges consist of:
1) DC Brush motor: 6-130mm diameter, .01-1000W output energy
two) DC Spur Gear Motor: twelve-110mm diameter, .1-300W output energy
3) DC Planeary Gear Motor: ten-82mm diameter, .1-100W output power 
4) Brushless DC Motor: 28-110mm, 5-1500W output power 
five) Stepper Motor: NEMA 08 to NEMA forty three, Can with gearbox and guide screw
six) Servo Motor: 42mm to 130mm diameter, 50-4000w 
7) AC Gear Motor: 49 to 100mm diameter, 6-140 output power 

1. Production Line:

two. Certificates:

3. Packing

4. Customer Visits:

5. FAQ:

Q: What is actually your primary goods?
A:We at the moment create Brushed Dc Motors, Brushed Dc equipment Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors and Ac Motors and many others. You can check the specs for over motors on our internet site and you can e-mail us to advise essential motors for each your specification too.

Q:How to choose a suitable motor?
A:If you have motor images or drawings to present us, or you have comprehensive specs like voltage, pace, torque, motor size, working method of the motor, required existence time and noise stage and many others, you should do not be reluctant to allow us know, then we can advocate appropriate motor per your ask for appropriately.

Q: Do you have tailored provider for your standard motors?
A:Sure, we can personalize for every your ask for for the voltage, speed, torque and shaft dimension/form. If you need to have further wires/cables soldered on the terminal or need to include connectors, or capacitors or EMC we can make it too.

Q:Do you have personal layout support for motors?
A:Of course, we would like to layout motors individually for our buyers, but it may possibly want some CZPT cost and design and style cost. 

Q:Can I have samples for tests very first?
A:Sure, undoubtedly you can. Following verified the needed motor specs, we will quote and offer a proforma invoice for samples, as soon as we get the payment, we will get a PASS from our account section to proceed samples accordingly.

Q:How do you make confident motor good quality?
A:We have our possess inspection processes: for incoming components, we have signed sample and drawing to make confident experienced incoming materials for creation procedure, we have tour inspection in the method and final inspection to make certain experienced products ahead of shipping and delivery.

Q:What’s your direct time?
A:Generally speaking, our regular regular product will need to have 25-30days, a bit lengthier for customized merchandise. But we are quite flexible on the lead time, it will depends on the particular orders

Q:What is actually your payment expression?
A:For all our new buyers, we will want 40% deposite, sixty% paid out just before shipment.

Q:When will you reply after received my inquiries?
A:We will reaction inside 24 hours when get your inquires.

Q:How can I trust you to make positive my income is risk-free?
A:We are accredited by the 3rd get together SGS and we have exported to more than 85 countries up to June.2017. You can check out our reputation with our present customers in your place (if our consumers do not head), or you can order through alibaba to get trade assurance from alibaba to make positive your money is secure.

Q:What is the minimum get amount?
A:Our bare minimum get amount depends on various motor designs, you should email us to verify. Also, we typically do not take private use motor orders. 

Q:What’s your delivery technique for motors?
A:For samples and deals much less than 100kg, we typically suggest categorical delivery For heavy offers, we typically recommend air shipping or sea delivery. But it all depends on our customers’ demands.

Q:What certifications do you have?
A:We presently have CE and ROSH certifications.

Q:Can you deliver me your value list?
A:Since we have hundreds of diverse goods, and cost varies for each distinct specs, we are not CZPT to offer you a price checklist. But we can quotation inside 24 several hours as soon as received your inquirues to make positive you can get the cost in time.

Q:Can I visit your firm?
A:Sure, welcome to pay a visit to our company, but please let us know at the very least 2 weeks in progress to aid us make certain no other conferences during the day you check out us. Many thanks!

Weclome make contact with with us if have any inquiries about this motor or other products!

Application: Universal, Household Appliances, Power Tools, Curtain and Others
Operating Speed: Low Speed
Function: Driving
Casing Protection: Open Type
Structure and Working Principle: Brush
Type: DC Gear Motor

###

Samples:
US$ 15/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Application: Universal, Household Appliances, Power Tools, Curtain and Others
Operating Speed: Low Speed
Function: Driving
Casing Protection: Open Type
Structure and Working Principle: Brush
Type: DC Gear Motor

###

Samples:
US$ 15/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

How to Select a Gear Motor

A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

Angular geared motors

Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.
Motor

Planetary gearboxes

Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Motor

Hydraulic gear motors

Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Motor

Croise motors

There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

China 1W 12V 24V 16mm Od DC Motor with Planetary Gear Box for Fingerprint Lock and Robot Toy     motor engine	China 1W 12V 24V 16mm Od DC Motor with Planetary Gear Box for Fingerprint Lock and Robot Toy     motor engine
editor by czh 2022-12-24