BOD Series 5 Tons Per Day W Cost aste Oil Recycling Used Motor Engine Oil Distillation Refining Machin best e

Product Description

BOD Series 5 Tons Per Day Waste Oil Recycling Used CZPT Engine Oil Distillation Refining CZPT

1.Waste engine oil waste car motor oil refinery to base oil ?
The main technology of waste oil regeneration in abroad is Kleen,Meinken,IFP,KTI,Snamprogetti,DOH,DCH,BERC and Recyclon.etc.New processes that have been applied abroad include ultrafiltration, centrifugal separation, molecular distillation, flocculation, solvent refining, etc.In the late 1980s, two regeneration processes were developed in CZPT .One is distillation-extraction-clay process, which uses ethanol as solvent for extraction; the other is high temperature clay process, which combines distillation and clay treatment in the same process.Recent thin film evaporator – furfural refining-clay process can extract more base oil fractions than conventional vacuum distillation, furfural has better extraction effect than ethanol, and the yield of base oil is higher.
According to the deterioration mechanism and degree of lubricating oil, the regeneration technology of waste engine oil can be divided into re-purification process, fine refining process and re-refining process.

2.Technology of CZPT company

 1) Process flow description

The process of waste oil reduction and regeneration base oil is introduced as follows: Our company specializes in the production of waste oil regeneration equipment and process research and development for more than ten years, and constantly explores and improves the technology. Combining with the advantages and disadvantages of the current equipment process, we focus on the materials in the process of waste oil processing equipment, which are easy to coke at high temperature, have high operating cost and have many potential safety hazards. The problem of high overhaul rate and high technical difficulty has been discussed and studied, and a lot of manpower and material resources have been invested. Through repeated testing and continuous improvement, the problem of easy coking of materials at high temperature has been successfully solved.

 2)Project overview(Examples for reference)
1)Project Name: 18,000T/a waste lubricant recycling project;
2) Nature of the industry: waste resources and recycling of waste materials;
3) Total investment: 20 million yuan
4) CZPT area: 14,000 square meters, construction area 5,120 square meters;
5) CZPT ing area: The whole plant has a CZPT area of 1820 square meters, and the CZPT ing rate is 13%;
6) Number of employees: 30 staff members;
7) Hours of work: 300 days for the whole year, 24 hours for the day, and 7,200 hours for the whole year;

1.Low investment, low wastage and high yield.89-96% high recovery rate
2.Can be used as the base oil of international standards, SN150.SN250.SN350
3.Easy to operate

4.Main Equipment introduction

1)Distillation tower introduction

Fractionating tower with structured packing

The tower is divided into:

a.In the top of the tower, the product is the first-line oil.;

b.Second-line return and recovery section, the product is CZPT -line oil;

c.Third-line return and recovery section, the product is third-line oil;
2)Tank and warehouse storage

5.The quality of oil from CZPT CZPT er:


6.Main product testing index

(Third-line oil) finished product quality inspection standard HVI250
1 Test items Indicators Reference standard
2 Flash point ≥220ºC

GB/T3536-1983   Flash point and flash point determination of 

petroleum products (Cleveland open cup method)

3 Pour point ≤-12ºC GB/T3535-1983  Petroleum products pour point measurement method
4 Chroma 2 GB/T6540-1986  Oil product color measurement method

Kinematic viscosity

 (40 degrees)


GB/T265-1988  Kinematic viscosity measurement and dynamic 

viscosity measurement of petroleum products 


Kinematic viscosity

 (100 degrees)


GB/T265-1988  Kinematic viscosity measurement and dynamic 

viscosity measurement of petroleum products 

7 Viscosity index ≥100  GB/T1995-1998   Oil Products Viscosity Index Calculation Method
8 Acid value ≤0.03(mgkoh/g)  GB/T264-1983  Oil product acid value measurement method


(54 degrees)

≤10min GB/T7305-2003  Separation of oil and synthetic liquids
10 Water content Trace GB/T260-1997  Oil Products Water Content Measurement Method

7.Packing and Delivering

Used CZPT Oil/Pyrolysis Oil Recycling Plant to Base oil .

Packing Details : CZPT case package of standard export.

Delivery Details : 15-30 days after received the deposit.

We will provide the most reliable, safest mode of transportation, in order to save shipping cost.

We will provide the most reliable, safest mode of transportation, in order to save shipping cost.

8.Successfull Installation


1.what process are you using ? 
The process of scraping film evaporator 
2.what is the output parameters of the base oil ? 
we can get international standard base oil ,like SN250. SN150.SN350 . 
3.did you ever build some plants in CZPT ? can we see it ? 
yes ,we have built some waste oil refining to base oil plant ,
you can visit the plant if you come to CZPT . we really welcome you to come to CZPT to visit CZPT plant .
4. do you have professional engineer to support oversea service ?
yes , we have professional engineer to support oversea service .
5.can you supply oversea installation ?
yes ,we can supply oversea installation support